2008

Conveyor Brake

altDesigned for decline conveyors with a fail-safe requirement, the EC100 RollerDrive from Interroll Corp. (Wilmington, NC) has a mechanical rotor locking break that prevents drifting on inclines while ensuring smooth operation, low-noise emission, and an extended operating lifetime. The EC100B brake mechanism requires no special control, as two wires are simply attached to the main power bus. The new technology comprises a mechanical rotor-locking break, which is spring-loaded and does only cycle with main power. The brake does not cycle with each start and stop of the conveyor. As long as the power bus is on, the magnetic force created by the solenoid keeps the rotor free.

For free info visit http://info.hotims.com/15140-310

White Papers

Maintenance Free Linear Guides
Sponsored by IKO
Force Sensors for Design
Sponsored by Tekscan
Automated Inspection Lowers Solar Cell Costs
Sponsored by Teledyne DALSA
Connectors Outperform Fardwiring for Manufacturers and Their Customers
Sponsored by Harting
Troubleshooting EMI in Embedded Designs
Sponsored by Rohde and Schwarz A and D
10 Ways to Make Your Wiring and Harness Design Faster and Better
Sponsored by Mentor Graphics

White Papers Sponsored By: