Push/Pull Switches

The PP1 and PP2 series push-pull switches from Lamb Industries, Inc. (Portland, OR) have push-and-pull capable actuators and can be specified for the unique ON2-ON1-(ON2) function. This function is a standard crossover function with an option of either a momentary action when the actuator is pushed or a maintained action when the actuator is pulled.

altThe switches are UL approved for 16 A at 125 VAC, 12 A at 250 VAC, and 1 hp at 125/250VAC. The PP1 is designed to snap into a panel with a 13.2 × 28-mm mounting hole, while the PP2 snaps into a 13.5 × 36-mm mounting hole. Both versions have several different standard terminal sizes and actuator shapes.

For free info Visit http://info.hotims.com/15132-322

White Papers

TechTalk Design Advice Series: The Cable Distribution Rules You Need To Obey
Sponsored by igus
Reverse Engineering
Sponsored by Servometer
Free Guide to High Performance Switching
Sponsored by Keithley
Removing the Gap Between ECAD and MCAD Design
Sponsored by Mentor Graphics
Flexible, High-Resolution Position/Displacement for OEM Applications
Sponsored by Kaman
IEC 61131-3 Now in Motion
Sponsored by Trio Motion

White Papers Sponsored By: