2009

Sensitive, Rapid Detection of Bacterial Spores

This capability is beneficial for medicine, public health, and biowarfare defense.

A method of sensitive detection of bacterial spores within delays of no more than a few hours has been developed to provide an alternative to a prior three-day NASA standard culture-based assay. A capability for relatively rapid detection of bacterial spores would be beneficial for many endeavors, a few examples being agriculture, medicine, public health, defense against biowarfare, water supply, sanitation, hygiene, and the food-packaging and medical-equipment industries.

altThe method involves the use of a commercial rapid microbial detection system (RMDS) that utilizes a combination of membrane filtration, adenosine triphosphate (ATP) bioluminescence chemistry, and analysis of luminescence images detected by a charge-coupled-device camera. This RMDS has been demonstrated to be highly sensitive in enumerating microbes (it can detect as little as one colony-forming unit per sample) and has been found to yield data in excellent correlation with those of culture-based methods. What makes the present method necessary is that the specific RMDS and the original protocols for its use are not designed for discriminating between bacterial spores and other microbes.

In this method, a heat-shock procedure is added prior to an incubation procedure that is specified in the original RMDS protocols. In this heat-shock procedure (which was also described in a prior NASA Tech Briefs article on enumerating spore-forming bacteria), a sample is exposed to a temperature of 80 °C for 15 minutes. Spores can survive the heat shock, but non-spore-forming bacteria and spore-forming bacteria that are not in spore form cannot survive. Therefore, any colonies that grow during incubation after the heat shock are deemed to have originated as spores.

This method also provides for reduction of the incubation time from the typical range (18 to 24 hours) required by the original RMDS protocols. This reduction was effected by evaluation of three commercial bioluminescence reagents (see figure), leading to the selection of one of them that makes it possible to effect detection after an incubation time of only ≈5 hours. The sensitivity and rapidity afforded by this method were demonstrated in tests in which seven species of Bacillus that had been repeatedly isolated from clean rooms were detected after incubation times of about 5 hours.

This work was done by Roger G. Kern, Kasthuri Venkateswaran, and Fei Chen of Caltech; Molly Pickett of Millipore Corp.; and Asahi Matsuyama of Kikkoman Corp. for NASA’s Jet Propulsion Laboratory. For more information, contact This email address is being protected from spambots. You need JavaScript enabled to view it.. NPO-40976

White Papers

Connectors Outperform Fardwiring for Manufacturers and Their Customers
Sponsored by Harting
Removing the Gap Between ECAD and MCAD Design
Sponsored by Mentor Graphics
Re-Inventing the Rotary Encoder: The No-Compromise IXARC from POSITAL
Sponsored by Fraba Posital
T&M Solutions for Software Defined Radios (SDR)
Sponsored by Rohde and Schwarz A and D
Tubing & Hose Buying Tips
Sponsored by Newage Industries
When Wire Feedthroughs Make Sense
Sponsored by Douglas Electrical Components

White Papers Sponsored By: