2009

Low-Noise Amplifier for 100 to 180 GHz

Noise temperature is lower than in the prior state of the art.

A three-stage monolithic millimeter-wave integrated-circuit (MMIC) amplifier designed to exhibit low noise in operation at frequencies from about 100 to somewhat above 180 GHz has been built and tested. This is a prototype of broadband amplifiers that have potential utility in diverse applications, including measurement of atmospheric temperature and humidity and millimeter-wave imaging for inspecting contents of opaque containers.

altaltFigure 1 depicts the amplifier as it appears before packaging. Figure 2 presents data from measurements of the performance of the amplifier as packaged in a WR-05 waveguide and tested in the frequency range from about 150 to about 190 GHz. The amplifier exhibited substantial gain throughout this frequency range. Especially notable is the fact that at 165 GHz, the noise figure was found to be 3.7 dB, and the noise temperature was found to be 370 K: This is less than half the noise temperature of the prior state of the art.

This work was done by Pekka Kangaslahti, David Pukala, King Man Fung, and Todd Gaier of Caltech and Xiaobing Mei, Richard Lai, and William Deal of Northrop Grumman Corporation for NASA’s Jet Propulsion Laboratory. For more information, contact This email address is being protected from spambots. You need JavaScript enabled to view it.. NPO-45178

White Papers

Metal Injection Molding Turns the Volume Up, and Down
Sponsored by Proto Labs
PICO xMOD Data Sheet
Sponsored by Nordson EFD
Step on It! Walking for Power
Sponsored by HP
Guidelines for Ensuring PCB Manufacturability
Sponsored by Sunstone Circuits
Optimum Fastener Selection for Internal Pumping in Vacuum Systems
Sponsored by UC Components
100% Non-Cytotoxic Rechargeable Batteries for Medical Devices
Sponsored by Cymbet

White Papers Sponsored By: