Low-Noise MMIC Amplifiers for 120 to 180 GHz

Potential applications include radar, communications, radiometry, and millimeter-wave imaging.

altThree-stage monolithic millimeter-wave integrated-circuit (MMIC) amplifiers capable of providing useful amounts of gain over the frequency range from 120 to 180 GHz have been developed as prototype low-noise amplifiers (LNAs) to be incorporated into instruments for sensing cosmic microwave background radiation. There are also potential uses for such LNAs in electronic test equipment, passive millimeter-wave imaging systems, radar receivers, communication receivers, and systems for detecting hidden weapons. The main advantage afforded by these MMIC LNAs, relative to prior MMIC LNAs, is that their coverage of the 120-to-180-GHz frequency band makes them suitable for reuse in a wider variety of applications without need to redesign them. Each of these MMIC amplifiers includes InP transistors and coplanar waveguide circuitry on a 50-μm-thick chip (see Figure 1). Coplanar waveguide transmission lines are used for both applying DC bias and matching of input and output impedances of each transistor stage. Via holes are incorporated between top and bottom ground planes to suppress propagation of electromagnetic modes in the substrate.

altOn the basis of computational simulations, each of these amplifiers was expected to operate with a small-signal gain of 14 dB and a noise figure of 4.3 dB. At the time of writing this article, measurements of noise figures had not been reported, but on-chip measurements had shown gains approaching their simulated values (see Figure 2).

This work was done by David Pukala, Lorene Samoska, and Alejandro Peralta of Caltech and Brian Bayuk, Ron Grundbacher, Patricia Oliver, Abdullah Cavus, and Po-Hsin Liu of Northrop Grumman Corporation for NASA’s Jet Propulsion Laboratory. NPO-42783

This Brief includes a Technical Support Package (TSP).

Low-Noise MMIC Amplifiers for 120 to 180 GHz (reference ) is currently available for download from the TSP library.

Please Login at the top of the page to download.

White Papers

Optimizing Automotive Wiring Designs Using Engineering Design Automation
Sponsored by Mentor Graphics
3D Printing of Aerospace Parts: A Real Solution with Real Benefits
Sponsored by Stratasys
Putting FPGAs to Work in Software Radio Systems
Sponsored by Pentek
Electropolishing for Hydraulics and Pneumatics
Sponsored by Able Electropolishing
Sense Element Pump Ripple Fatigue
Sponsored by Hydra Electric
When Wire Feedthroughs Make Sense
Sponsored by Douglas Electrical Components

White Papers Sponsored By:

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.