2009

Reconfigurable, Bi-Directional Flexfet Level Shifter for Low- Power, Rad-Hard Integration

These level shifters enable the development of multi-level voltage systems.

Two prototype Reconfigurable, Bidirectional Flexfet Level Shifters (ReBiLS) have been developed, where one version is a stand-alone component designed to interface between external low voltage and high voltage, and the other version is an embedded integrated circuit (IC) for interface between internal low-voltage logic and external high-voltage components. Targeting stand-alone and embedded circuits separately allows optimization for these distinct applications. Both ReBiLS designs use the commercially available 180-nm Flex - fet Inde pend ently Double-Gated (IDG) SOI CMOS (silicon on insulator, complementary metal oxide semiconductor) technology. Embedded ReBiLS circuits were integrated with a Reed-Solomon (RS) encoder using CMOS Ultra-Low-Power Radiation Tolerant (CULPRiT) doublegated digital logic circuits. The scope of the project includes: creation of a new high-voltage process, development of ReBiLS circuit designs, and adjustment of the designs to maximize performance through simulation, layout, and manufacture of prototypes.

The primary technical objectives were to develop a high-voltage, thick oxide option for the 180-nm Flexfet process, and to develop a stand-alone ReBiLS IC with two 8-channel I/O busses, 1.8–2.5 I/O on the low-voltage pins, 5.0-V-tolerant input and 3.3-V output I/O on the high-voltage pins, and 100-MHz minimum operation with 10-pF external loads.

Another objective was to develop an embedded, rad-hard ReBiLS I/O cell with 0.5-V low-voltage operation for interface with core logic, 5.0-V-tolerant input and 3.3-V output I/O pins, and 100-MHz minimum operation with 10- pF external loads.

A third objective was to develop a 0.5- V Reed-Solomon Encoder with embedded ReBilS I/O:

  • Transfer the existing CULPRiT RS encoder from a 0.35-μm bulk-CMOS process to the ASI 180-nm Flexfet, radhard SOI Process.
  • 0.5-V low-voltage core logic.
  • 5.0-V-tolerant input and 3.3-V output I/O pins.
  • 100-MHz minimum operation with 10- pF external loads.

The stand-alone ReBiLS chip will allow system designers to provide efficient bi-directional communication between components operating at different voltages. Embedding the ReBiLS cells into the proven Reed-Solomon encoder will demonstrate the ability to support new product development in a commercially viable, rad-hard, scalable 180-nm SOI CMOS process.

This work was done by Kelly DeGregorio and Dale G. Wilson of American Semiconductor, Inc. for Goddard Space Flight Center. For more information, download the Technical Support Package (free white paper) at www.techbriefs.com/tsp under the Semiconductors & ICs category. GSC- 15565-1

This Brief includes a Technical Support Package (TSP).

Reconfigurable, Bi-Directional Flexfet Level Shifter for Low-Power, Rad-Hard Integration (reference GSC-15565-1) is currently available for download from the TSP library.

Please Login at the top of the page to download.

 

White Papers

The Basics Of Pressure Regulators
Sponsored by Beswick
Step on It! Walking for Power
Sponsored by HP
Measurement of Harmonics using Spectrum Analyzers
Sponsored by Rohde and Schwarz A and D
10 Tips For Designing Silicone Medical Components
Sponsored by SMC
Avoid the High Cost of Quality Failure
Sponsored by Arena Solutions
Is There an Easy Way to Cut the Cost of EWIS Compliance?
Sponsored by Mentor Graphics

White Papers Sponsored By: