2009

Stepper Motor and Driver/Controller

The CRK Series five-phase stepping motors and drivers/controllers from Oriental Motor USA Corp. (Torrance, CA) have a built-in RS-485 controller package that controls up to 16 axes of motion. Five network communications rates of up to 115,000 bps can be selected. The controller can be operated in either direct command mode, standalone mode, or by selecting stored programs to run via I/O.

altThe motors provide step resolutions up to 0.00288 degrees per step with step accuracy of 3 arc-minutes. High resolution models provide step resolutions to 0.00144 degrees per step and step accuracy of 2 arc minutes. The driver/controllers accept 24Vdc inputs with motor frame sizes of 0.79, 1.10, 1.65, and 2.36 in. square. Output torque ranges from 3.2 oz-in. to 35 lb-in. The driver measures 1.37 W x 2.75 L x 3.97 H (in.).

For free Info Visit http://info.hotims.com/22932-300

White Papers

How Paper-based 3D Printing Works: The Technology and Advantages
Sponsored by Mcor Technologies
Removing the Gap Between ECAD and MCAD Design
Sponsored by Mentor Graphics
Introduction to Hypervisor Technology
Sponsored by Curtiss-Wright Controls Embedded Computing
The Aerospace Industry Takes a Fresh Look at Its Wire Harness Design Approach
Sponsored by Mentor Graphics
Domestic Versus Offshore PCB Manufacturing
Sponsored by Sunstone Circuits
OEM Optical System Development
Sponsored by Ocean Optics

White Papers Sponsored By: