2009

Ejector-Enhanced, Pulsed, Pressure-Gain Combustor

Specific fuel consumption of a gas turbine engine could be reduced by a few percent.

An experimental combination of an off-the-shelf valved pulsejet combustor and an aerodynamically optimized ejector has shown promise as a prototype of improved combustors for gas turbine engines. Despite their name, the “constant pressure” combustors heretofore used in gas turbine engines exhibit typical pressure losses ranging from 4 to 8 percent of the total pressures delivered by upstream compressors. In contrast, the present ejector-enhanced pulsejet combustor exhibits a pressure rise of about 3.5 percent at overall enthalpy and temperature ratios compatible with those of modern turbomachines. The modest pressure rise translates to a comparable increase in overall engine efficiency and, consequently, a comparable decrease in specific fuel consumption. The ejector-enhanced pulsejet combustor may also offer potential for reducing the emission of harmful exhaust compounds by making it practical to employ a low-loss rich-burn/quench/lean-burn sequence.

altLike all prior concepts for pressure-gain combustion, the present concept involves an approximation of constant-volume combustion, which is inherently unsteady (in this case, more specifically, cyclic). The consequent unsteadiness in combustor exit flow is generally regarded as detrimental to the performance of downstream turbomachinery. Among other adverse effects, this unsteadiness tends to detract from the thermodynamic benefits of pressure gain. Therefore, it is desirable in any intermittent combustion process to minimize unsteadiness in the exhaust path.

One of the easiest ways of approximating constant-volume combustion is to use a process similar to that used in commercially available pulsejets. Unfortunately, the pulsed combustion effluent is far too hot for any turbine and must, therefore, be mixed with some cooler bypass flow. The mixing process introduces losses that substantially degrade overall engine performance.

The present concept of the ejectorenhanced pulsejet combustor utilizes the demonstrated ability of properly designed, unsteady-flow ejectors (augmentors) to efficiently entrain, mix, and smooth secondary flows. The aerodynamically optimized ejector is placed aft of the pulsejet combustor. The pulsejet combustor and the ejector are encased in a shroud (see figure). The ejector is essentially an axisymmetric, tapered duct with an aerodynamic inlet. The ejector entrains the cool secondary flow to produce an exhaust flow in a temperature range that can be tolerated by turbomachinery. Acting in combination with the shroud, the ejector also reduces spatial and temporal nonuniformities in the flow, thereby mitigating the detrimental effects of the pulsed combustion process. Finally, the relatively high momentum-transfer efficiency of the ejector ensures that taken as a whole, the ejector-enhanced pulsejet combustor yields a modest, time-averaged pressure rise.

In tests, the root-mean-square value of exit pressure fluctuations was found to be about 4.5 percent of the mean total pressure. This value is near the limit above which pressure fluctuations are considered to adversely affect the performance of downstream turbomachinery.

This work was done by Daniel E. Paxson of Glenn Research Center and Kevin T. Dougherty of QSS Group, Inc.

Inquiries concerning rights for the commercial use of this invention should be addressed to NASA Glenn Research Center, Innovative Partnerships Office, Attn: Steve Fedor, Mail Stop 4–8, 21000 Brookpark Road, Cleveland, Ohio 44135. Refer to LEW-18096-1.

This Brief includes a Technical Support Package (TSP).

Ejector-Enhanced, Pulsed, Pressure- Gain Combustor (reference LEW-18096-1) is currently available for download from the TSP library.

Please Login at the top of the page to download.

 

White Papers

Making Waste History: 3D Measurement Technology Bumps Bottom-line Growth
Sponsored by FARO
Envelope Tracking and Digital Pre-Distortion Test Solution for RF Amplifiers
Sponsored by Rohde and Schwarz A and D
Tubing & Hose Buying Tips
Sponsored by Newage Industries
Recruit Or Retain Report
Sponsored by Aerotek
Tubing & Hose Buying Tips, Part 2
Sponsored by Newage Industries
Estimating the Effort and Cost of a DO-254 Program
Sponsored by Logic Circuit

White Papers Sponsored By: