A Technique for Adjusting Eigenfrequencies of WGM Resonators

A simple technique has been devised for making small, permanent changes in the eigenfrequencies (resonance frequencies) of whispering-gallery-mode (WGM) dielectric optical resonators that have high values of the resonance quality factor (Q). The essence of the technique is to coat the resonator with a thin layer of a transparent polymer having an index of refraction close to that of the resonator material.

Successive small frequency adjustments can be made by applying successive coats. The technique was demonstrated on a calcium fluoride resonator to which successive coats of a polymer were applied by use of a hand-made wooden brush. To prevent temperature-related frequency shifts that could interfere with the verification of the effectiveness of this technique, the temperature of the resonator was stabilized by means of a three-stage thermoelectric cooler. Measurements of the resonator spectrum showed the frequency shifts caused by the successive coating layers.

This work was done by Dmitry Strekalov, Anatoliy Savchenkov, Lute Maleki, Andrey Matsko, Vladimir Iltchenko, and Jan Martin of Caltech for NASA’s Jet Propulsion Laboratory.

In accordance with Public Law 96-517, the contractor has elected to retain title to this invention. Inquiries concerning rights for its commercial use should be addressed to:

Innovative Technology Assets Management
Mail Stop 202-233
4800 Oak Grove Drive
Pasadena, CA 91109-8099
(818) 354-2240
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Refer to NPO-44383, volume and number of this NASA Tech Briefs issue, and the page number.

This Brief includes a Technical Support Package (TSP).

A Technique for Adjusting Eigenfrequencies of WGM Resonators (reference NPO-44383) is currently available for download from the TSP library.

Please Login at the top of the page to download.


White Papers

Electropolishing for Hydraulics and Pneumatics
Sponsored by able electropolishing
How to Turn Your Engineers Into Product Design Superheroes
Sponsored by arena solutions
White Paper: MIL-STD-1553 IP Cores - An Emerging Technology
Sponsored by Sealevel
Avionics Reliability – Thermal Design Considerations
Sponsored by Mentor Graphics
Microelectronics Package for Extreme Environments
Sponsored by msk products
Made in Space: 3D Printing in Zero-G
Sponsored by stratasys

White Papers Sponsored By: