2009

Small, Mechanical Valve for Use With Propellant Gas

A valve technology is sought that can be used with a propellant- gas-based device aimed at the consumer goods industry. The valve will be used with a canister of propellant gas, in a handheld consumer device, and needs to be small, lightweight, and low-cost. The size should be in the millimeter to centimeter range, weigh less than 5 grams, require no priming, be air-actuated, allow a flow rate between 25 mL/sec and 90 mL/sec, and be manufactured from materials that meet European Union or FDA requirements.

Respond to this TechNeed at:
www.techbriefs.com/tn/200910d.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

How to Select an Analog Signal Generator
Sponsored by rohde and schwarz a and d
Avoid the High Cost of Quality Failure
Sponsored by Arena Solutions
dB or not dB? Everything you ever wanted to know about decibels but were afraid to ask...
Sponsored by rohde and schwarz a and d
The Benefits of Integrated Video Management
Sponsored by Curtiss Wright
Selecting Miniature Motors for your Medical Devices
Sponsored by Portescap
Bonded Magnets: A Versatile Class of Permanent Magnets
Sponsored by magnet applications

White Papers Sponsored By: