2010

Industrial 50W Picosecond Laser

altRPMC Lasers (O’Fallon, MO) has introduced an industrial 50W picosecond laser suitable for manufacturers who need to drill or cut thin materials to produce components that should not be subjected to heat. Because the RAPID lasers have such short pulses, heat generated by the beam will not migrate into heat-affected zones. The result is a laser process known as cold micromachining that generates no burrs or splatter. The picosecond lasers are effective on materials under 1 mm in thickness, and offer removal rates as high as 30 mm3/min. The lasers are effective on all materials used in semiconductor, electronics, solar cell, aerospace, automotive, medical, microfluidics, micromold technology, etc. They also feature 50W average power with

Photonics West Booth #4824
For Free Info Visit http://info.hotims.com/28049-212

White Papers

An Improved Method for Differential Conductance Measurements
Sponsored by Keithley Instruments
StarVX - A Generic Scalable Computer Architecture
Sponsored by Kontron
Bearing selection for low-speed applications
Sponsored by Kaydon
An Introduction to Stress Analysis and Transducer Design Using Strain Gauges
Sponsored by HBM
Electroforming Basics
Sponsored by Servometer
Recruit Or Retain Report
Sponsored by Aerotek

White Papers Sponsored By: