2010

Reciprocating Linear Drive

The Amacoil-Uhing Kinemax reciprocating linear drive from Amacoil (Aston, PA) features pitch adjustment and automatic reversal without requiring clutches, cams, or gears. A ten-toone pitch adjustment range is possible by turning the dial on the front of the drive unit. The unit reverses direction automatically without reversing the drive motor. A mechanical reversal device changes drive nut travel direction with no interruptions in operation and without adjusting any controls.

altFeaturing a rugged composite housing, the drive has 7 pounds of axial thrust and is suitable for light-duty linear motion applications with low drive torque requirements. The unit mounts on a standard 15-mm, case-hardened ground shaft. The drive may be mounted for vertical, horizontal, or diagonal linear movement where reversal time is not more than once every two seconds. Stroke lengths of ½" to about 24" are possible.

For Free Info Visit http://info.hotims.com/28054-306

White Papers

An Improved Method for Differential Conductance Measurements
Sponsored by Keithley Instruments
Is There an Easy Way to Cut the Cost of EWIS Compliance?
Sponsored by Mentor Graphics
Spherical Plain Bearing
Sponsored by AST Bearings
Expanding GNSS Testing with Multiple Synchronized Signal Recorders
Sponsored by Averna
Improving Cable Performance in Harsh Environments
Sponsored by Gore
Fundamentals of Vector Network Analysis Primer
Sponsored by Rohde and Schwarz A and D

White Papers Sponsored By: