2010

DC Motors

AMETEK Technical & Industrial Products (Harleysville, PA) offers the Pittman® Series 8540 30-mm brush-commutated DC motors that integrate bonded neodymium magnets and 7-slot straight armature to minimize cogging. The motors feature a diamond-turned commutator and copper-graphite brushes for high current capacity. The motors are 1.181" in diameter and are available in three standard lengths of 2.080, 2.552, and 3.025". They achieve continuous torque to 9.3 oz-in and continuous power to 43W, depending on model. They also feature peak torque up to 78.7 oz-in and speeds to 6440 rpm at continuous torque for standard motors at rated voltages.

altA PC board brush card with integral surface-mount components incorporates electrical noise suppression, and an integral connector header enables custom leadwire configurations. The modular design accommodates gearboxes, encoders, and brakes using adapter plates and shaft extension modifications.

For Free Info Visit http://info.hotims.com/28052-303

White Papers

Rapidly Expanding Array of Test Applications Continues to Drive Source Measurement Unit Instrument T
Sponsored by Keithley Instruments
Using Acoustic Beamforming for Pass-By Noise Source Detection
Sponsored by National Instruments
An Alternative to Check Fixtures
Sponsored by Faro
Recruit Or Retain Report
Sponsored by Aerotek
PICO Brochure
Sponsored by Nordson EFD
Today’s Advanced Hose and Hydraulic Systems
Sponsored by Gates

White Papers Sponsored By: