2010

Parameterizing Coefficients of a POD-Based Dynamical System

This parameterization enables accurate prediction of temporal evolution of certain flow dynamics.

A method of parameterizing the coefficients of a dynamical system based of a proper orthogonal decomposition (POD) representing the flow dynamics of a viscous fluid has been introduced. (A brief description of POD is presented in the immediately preceding article.) The present parameterization method is intended to enable construction of the dynamical system to accurately represent the temporal evolution of the flow dynamics over a range of Reynolds numbers.

The need for this or a similar method arises as follows: A procedure that includes direct numerical simulation followed by POD, followed by Galerkin projection to a dynamical system has been proven to enable representation of flow dynamics by a low-dimensional model at the Reynolds number of the simulation. However, a more difficult task is to obtain models that are valid over a range of Reynolds numbers. Extrapolation of low-dimensional models by use of straightforward Reynolds-number-based parameter continuation has proven to be inadequate for successful prediction of flows.

A key part of the problem of constructing a dynamical system to accurately represent the temporal evolution of the flow dynamics over a range of Reynolds numbers is the problem of understanding and providing for the variation of the coefficients of the dynamical system with the Reynolds number. Prior methods do not enable capture of temporal dynamics over ranges of Reynolds numbers in low-dimensional models, and are not even satisfactory when large numbers of modes are used.

The basic idea of the present method is to solve the problem through a suitable parameterization of the coefficients of the dynamical system. The parameterization computations involve utilization of the transfer of kinetic energy between modes as a function of Reynolds number. The thus-parameterized dynamical system accurately predicts the flow dynamics and is applicable to a range of flow problems in the dynamical regime around the Hopf bifurcation. Parameter-continuation software can be used on the parameterized dynamical system to derive a bifurcation diagram that accurately predicts the temporal flow behavior.

This work was done by Virginia L. Kalb of Goddard Space Flight Center. For further information, contact the Goddard Innovative Partnerships Office at (301) 286-5810. GSC-15131-1

White Papers

An Improved Method for Differential Conductance Measurements
Sponsored by Keithley Instruments
High Reliability Flexible Circuits for the Medical Marketplace
Sponsored by Tech Etch
Overcoming the Barriers Imposed by Geometry
Sponsored by SpaceClaim
Uncooled Infrared Imaging: Higher Performance, Lower Costs
Sponsored by Sofradir EC
The Aerospace Industry Takes a Fresh Look at Its Wire Harness Design Approach
Sponsored by Mentor Graphics
Antenna Basics
Sponsored by Rohde and Schwarz

White Papers Sponsored By: