2010

Vacuum-Compatible Wideband White Light and Laser Combiner Source System

For the Space Interferometry Mission (SIM) Spectrum Calibration Development Unit (SCDU) testbed, wideband white light is used to simulate starlight. The white light source mount requires extremely stable pointing accuracy ( lights were coupled to a photonic crystal fiber (PCF).

In many optical systems, simulating a point star with broadband spectrum with stability of microradians for white light interferometry is a challenge. In this case, the cameras use the white light interference to balance two optical paths, and to maintain close tracking. In order to coarse align the optical paths, a laser light is sent into the system to allow tracking of fringes because a narrow band laser has a great range of interference.

The design requirements forced the innovators to use a new type of optical fiber, and to take a large amount of care in aligning the input sources. The testbed required better than 1% throughput, or enough output power on the lowest spectrum to be detectable by the CCD camera (6 nW at camera). The system needed to be vacuum-compatible and to have the capability for combining a visible laser light at any time for calibration purposes.

The red laser is a commercially produced 635-nm laser 5-mW diode, and the white light source is a commercially produced tungsten halogen lamp that gives a broad spectrum of about 525 to 800 nm full width at half maximum (FWHM), with about 1.4 mW of power at 630 nm. A custom-made beam splitter window with special coating for broadband wavelengths is used with the white light input via a 50-mm multimode fiber. The large mode area PCF is an LMA-8 made by Crystal Fibre (core diameter of 8.5 mm, mode field diameter of 6 mm, and numerical aperture at 625 nm of 0.083). Any science interferometer that needs a tracking laser fringe to assist in alignment can use this system.

This work was done by Alireza Azizi, Daniel J. Ryan, Hong Tang, Richard T. Demers, Hiroshi Kadogawa, Xin An, and George Y. Sun of Caltech for NASA’s Jet Propulsion Laboratory. For more information, download the Technical Support Package (free white paper) at www.techbriefs.com/tsp under the Physical Sciences category. NPO-46165

This Brief includes a Technical Support Package (TSP).

Vacuum-Compatible Wideband White Light and Laser Combiner Source System (reference NPO-46165) is currently available for download from the TSP library.

Please Login at the top of the page to download.

 

White Papers

3D Printing with FDM: How it Works
Sponsored by Stratasys
Flexible, High-Resolution Position/Displacement for OEM Applications
Sponsored by Kaman
Antenna Basics
Sponsored by Rohde and Schwarz
Analog Signal Conditioning for Accurate Measurements
Sponsored by Sealevel
Drive On – E-Bikes Shift into High Gear
Sponsored by HP
Telematics: An Industry Game-Changer
Sponsored by SAP

White Papers Sponsored By: