2010

Crossed, Small-Deflection Energy Analyzer for Wind/Temperature Spectrometer

This analyzer has application in improving the predictability of GPS operations.

Determination of neutral winds and ion drifts in low-Earth-orbit missions requires measurements of the angular and energy distributions of the flux of neutrals and ions entering the satellite from the ram direction. The magnitude and direction of the neutral-wind (or ion-drift) determine the location of the maximum in the angular distribution of the flux. Knowledge of the angle of maximum flux with respect to satellite coordinates (pointing) is essential to determine the wind (or ion-drift) vector.

altThe crossed Small-Deflection Energy Analyzer (SDEA) spectrometer (see Figure 1) occupies minimal volume and consumes minimal power. Designed for upper atmosphere/ionosphere investigations at Earth altitudes above 100 km, the spectrometer operates by detecting the angular and energy distributions of neutral atoms/molecules and ions in two mutually perpendicular planes. In this configuration, the two detection planes actually cross at the spectrometer center. It is possible to merge two SDEAs so they share a common optical axis and alternate measurements between two perpendicular planes, and reduce the number of ion sources from two to one. This minimizes the volume and footprint significantly and reduces the ion source power by a factor of two. The area of the entrance aperture affects the number of ions detected/ second and also determines the energy resolution.

altThermionic emitters require heater power of about 100 mW to produce 1 mA of electron beam current. Typically, electron energy is about 100 eV and requires a 100-V supply for electron acceleration to supply an additional 100 mW of power. Thus, ion source power is at most 200 mW. If two ion sources were to be used, the ion source power would be, at most, 400 mW. Detector power, deflection voltage power, and microcontroller and other functions require less than 150 mW. A WTS (wind/temperature spectrometer) with two separate optical axes would consume about 650 mW, while the crossed SDEA described here consumes about 350 mW.

The entrance aperture has a diameter of 0.004 in. (0.10 mm) to provide the required energy resolution between 0.05 and 0.15. This design (see Figure 2) provides a WTS occupying a volume less than 40 cm3, on a footprint of diameter about 1.5 in. (38 mm).

The Crossed SDEA offers many advantages in the measurements of neutral wind and ion drifts in the Earth’s thermosphere. As such, it will be useful in future commercial satellites dedicated to monitoring the ionosphere with a view to improving the integrity and predictability of GPS operations.

This work was done by Federico A. Herrero of Goddard Space Flight Center and Theodore T. Finne of the Naval Research Laboratory. For further information, contact the Goddard Innovative Partnerships Office at (301) 286-5810.

This invention is owned by NASA, and a patent application has been filed. Inquiries concerning nonexclusive or exclusive license for its commercial development should be addressed to the Patent Counsel, Goddard Space Flight Center, (301) 286-7351. Refer to GSC-15732-1.

White Papers

The Benefits of Integrated Video Management
Sponsored by Curtiss Wright
Avoid the High Cost of Quality Failure
Sponsored by Arena Solutions
Guidelines for Ensuring PCB Manufacturability
Sponsored by Sunstone Circuits
Serial Fabrics Improve System Design
Sponsored by Pentek
10 Essential Questions for Reevaluating Your Medical Device Assembly Process
Sponsored by Nordson EFD
Epoxies and Glass Transition Temperature
Sponsored by Master Bond

White Papers Sponsored By: