2010

Technology for Drilling/Cutting/Separating Materials

A company seeks alternative methods for sawing, drilling, boring, cutting, or otherwise separating materials such as wood, metal, and composites. When compared to conventional sawing, drilling, boring, or other cutting methods, the new method should be faster and easier; provide a cleaner cut in terms of smooth wall or bore and in chips, dust, or contamination of the work area; offer a longer tool life; minimize noise level; require low physical force during operation; be safe for use in an open environment; and reduce dependence on traditional power tools used in the workplace.

Respond to this TechNeed at:
www.techbriefs.com/tn/201003c.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

Reverse Engineering
Sponsored by Servometer
What They Didn’t Teach You in Engineering School About Heat Transfer
Sponsored by Mentor Graphics
Antenna Basics
Sponsored by Rohde and Schwarz
Working With Mechanical Motion Subsystems
Sponsored by Bell Everman
Weight Reduction and Space Savings in Wire and Cable Design and Their Contribution to Aerospace Desi
Sponsored by Thermax
X-Ray Imaging: Emerging Digital Technology - CMOS Detectors
Sponsored by Teledyne DALSA

White Papers Sponsored By: