2011

Miniature Atom-Based Magnetic Sensor

This invention was demonstrated to successfully track a human heartbeat.

Researchers from the National Institute of Standards and Technology (NIST) and the German national metrology institute have used a miniature atom-based magnetic sensor to successfully track a human heartbeat, confirming the device’s potential for biomedical applications.

alt

The miniature magnetic sensor is about the size of a sugar cube. The lid has been removed to show the inner square cell, which contains a gas of rubidium atoms. The diagonal bar is an electrical connection to the cell’s heaters, which are powered by the red, black, and white electrical wires. The clear optical fiber extending from the middle bottom of the sensor connects to a rol box.

This study is the first to be performed under conditions resembling a clinical setting with the NIST mini-sensors, which until now have been operated mostly in physics laboratories. The new experiments were carried out at the Physikalisch Technische Bundesanstalt (PTB) in Berlin, Germany, in a building described as having the world’s best magnetic shielding — necessary to block the Earth’s magnetic field and other external sources from interfering with the high-precision measurements. PTB has an ongoing program in biomagnetic imaging using human subjects.

The NIST sensor — a tiny container of about 100 billion rubidium atoms in gas form, a low-power infrared laser, and optics — measured the heart’s magnetic signature in picoteslas (trillionths of a tesla). The tesla is the unit that defines magnetic field strength. For comparison, the Earth’s magnetic field is a million times stronger (measured in millionths of a tesla) than a heartbeat, and an MRI machine uses fields several million times stronger still (operating at several tesla).

In the experiments at PTB, the NIST sensor was placed 5 millimeters above the left chest of a person lying face up on a bed. The sensor successfully detected the weak but regular magnetic pattern of the heartbeat. The same signals were recorded using the “gold standard” for magnetic measurements, a SQUID (superconducting quantum interference device). A comparison of the signals confirmed that the NIST mini-sensor correctly measured the heartbeat and identified many typical signal features. The NIST mini-sensor generates more “noise” (interference) in the signal but has the advantage of operating at room temperature, whereas SQUIDs work best at minus 269 degrees Celsius and require more complicated and expensive supporting apparatuses.

A spin-off of NIST’s miniature atomic clocks, NIST’s magnetic mini-sensors were first developed in 2004. Recently, they were packaged with fiber optics for detecting the light signals that register magnetic field strength. In addition, the control system has been reduced in size, so the entire apparatus can be transported easily to other laboratories.

The new results suggest that NIST mini-sensors could be used to make magnetocardiograms, a supplement or alternative to electrocardiograms. The study also demonstrated for the first time that atomic magnetometers can offer sensing stability lasting tens of seconds, as needed for an emerging technique called magnetorelaxometry (MRX), which measures the magnetization decay of magnetic nanoparticles. MRX is used to localize, quantify, and image magnetic nanoparticles inserted into biological tissue for medical applications such as targeted drug treatments. Further tests of the NIST sensors at PTB are planned.

This technology was done by the National Institute of Standards and Technology, Gaithersburg, MD. For more information, visit http://www.nist.gov.

White Papers

How Lean Manufacturing Adds Value to PCB Production
Sponsored by Sunstone Circuits
Determining an Effective Analog Sampling Rate
Sponsored by Sealevel
Magnetics Design: Specification, Performance & Economics
Sponsored by Datatronics
OEM Optical System Development
Sponsored by Ocean Optics
Lubricant Selection: What Every Design Engineer Needs to Know
Sponsored by Magnalube
6 Ways Software Rendering Boosts Embedded System Graphics
Sponsored by ENSCO Avionics

White Papers Sponsored By: