Carbon Nanotubes for Stray Light Suppression

Bright light from sources such as the Earth or bright stars is scattered on surfaces of scientific instruments and creates noise in scientific observations. All scientific instruments have baffles, stops, and other components that are used to reduce the amount of stray light that decreases signal to noise. The use of an improved material on these components can decrease the number of control measures to simplify design. For Earth-viewing instruments, a significant fraction of the data collected is unusable due to contamination of imagery because of scattering of light from high-contrast regions to dim regions such as ice/water or cloud/water scene boundaries. Lastly, viewing dim companions to bright stars requires extraordinary reduction in scattered light to allow imaging.

altResearchers at the NASA Goddard Space Flight Center (GSFC), led by John Hagopian, have been engineering low-reflectance materials that utilize carbon nanotubes to decrease the total amount of light that is reflected by a factor of 8; that is, the total integrated scatter or hemispherical reflectance is eight times lower than in surface treatments currently used by NASA. This is about 0.5% total integrated scatter versus nearly 4% for Z306 paint at 1-micron wavelength. NASA GSFC is also growing nanotubes on alternate substrates more suitable for structural applications. Performance characteristics can be seen in the graph.

NASA’s Need

Currently, carbon nanotube surface treatments are limited to components that can fit within a nanotube furnace. These typically accommodate samples up to 4" in diameter. Scaling the system up to accommodate larger components would be of great benefit. The process for growing carbon nanotubes also requires that the substrate be exposed to a 750 ° C environment. Therefore, an alternative process that results in comparably dark carbon nanotubes would also be beneficial and allow more widespread use of this technology.


Control of stray light by engineering low-reflectance surface treatments has numerous benefits, including:

  • Simplification of instrument stray light controls to achieve equivalent performance,
  • Increasing observational efficiencies by recovering currently unusable scenes in high-contrast regions, and
  • Enabling low-noise observations that are beyond current capabilities.

More Information

For more information, contact John Hagopian at This email address is being protected from spambots. You need JavaScript enabled to view it.; NASA Goddard Space Flight Center at http://ipp.gsfc.nasa.gov, or This email address is being protected from spambots. You need JavaScript enabled to view it..

White Papers

How to Select an Analog Signal Generator
Sponsored by rohde and schwarz a and d
The Changing Face of Robotics
Sponsored by maplesoft
Adhesives, Sealants & Coatings for the Aerospace Industry
Sponsored by master bond
The Need for Speed
Sponsored by flir
Fiber Optic Rotary Joints Add a Spin to Sensing, Mobile, and Robotic Fiber Systems
Sponsored by princetel
Electroforming Basics
Sponsored by Servometer

White Papers Sponsored By: