Workholding Products

Enerpac (Menomonee Falls, WI) offers a 70- bar line of products for low-pressure workholding applications, including link clamps, swing clamps, and remote mount system valves. The products are designed for applications where low hydraulic pressure is needed to hold workpieces in machining fixtures, welding fixtures, or leak testing machines. Link clamps can be used when a height obstacle must be reached over, instead of swung around. Swing clamps are for applications where part loading may be hindered by other clamp styles. Swing clamps swing out to provide easy access for loading and unloading.

altThe link clamps are offered in a range of models, including 2 kN, 3.5 kN, 5 kN, 7 kN, and 9 kN capacities, with right-hand, center, and left-hand configurations. Swing clamps are available in 2 kN, 3.5 kN, 5 kN, 7 kN, 9 kN, and 20 kN models in left- and right-turning configurations. Models with position indication staffs are available for applications where clamp position sensing is required.

For Free Info Visit http://info.hotims.com/34461-313

White Papers

Avionics Reliability – Thermal Design Considerations
Sponsored by Mentor Graphics
Evolution of the Modern Receiver in a Crowded Spectrum Environment
Sponsored by rohde and schwarz a and d
IEC 61131-3 Now in Motion
Sponsored by Trio Motion
3D Printing Materials: Choosing the Right Material
Sponsored by stratasys
Multi-channel, Multi-board Coherency for SWaP-Constrained SIGINT and EW
Sponsored by curtiss wright
External Power Supply Efficiency Regulation Introduction
Sponsored by mega electronics

White Papers Sponsored By: