2011

Space Mirror Alignment System

An optical alignment mirror mechanism (AMM) has been developed with angular positioning accuracy of ±0.2 arcsec. This requires the mirror’s linear positioning actuators to have positioning resolutions of ±112 nm to enable the mirror to meet the angular tip/tilt accuracy requirement. Demonstrated capabilities are ±0.1 arc-sec angular mirror positioning accuracy, which translates into linear positioning resolutions at the actuator of ±50 nm.

The mechanism consists of a structure with sets of cross-directional flexures that enable the mirror’s tip and tilt motion, a mirror with its kinematic mount, and two linear actuators. An actuator comprises a brushless DC motor, a linear ball screw, and a piezoelectric brake that holds the mirror’s position while the unit is unpowered. An interferometric linear position sensor senses the actuator’s position. The AMMs were developed for an Astrometric Beam Combiner (ABC) optical bench, which is part of an interferometer development. Custom electronics were also developed to accommodate the presence of multiple AMMs within the ABC and provide a compact, all-in-one solution to power and control the AMMs.

This work was done by Bruno M. Jau, Colin McKinney, Robert F. Smythe, and Dean L. Palmer of Caltech for NASA’s Jet Propulsion Laboratory. For more information, contact This email address is being protected from spambots. You need JavaScript enabled to view it.. NPO-47928

White Papers

Epoxies and Glass Transition Temperature
Sponsored by Master Bond
Noncontact Differential Impedance Transducer
Sponsored by Kaman
Overcome Challenges of Your Highly Constrained PCB Designs
Sponsored by Mentor Graphics
Laser-Induced Damage to Large Core Optical Fiber by High Peak Power Laser
Sponsored by OFS
Introduction to Hypervisor Technology
Sponsored by Curtiss-Wright Controls Embedded Computing
Uncooled Infrared Imaging: Higher Performance, Lower Costs
Sponsored by Sofradir EC

White Papers Sponsored By: