2011

Sensitive, Robust Sensors for Ethane and Methane Detection

A company seeks a sensor that is sensitive and quantitative for ethane from 5 ppm to 5,000 ppm, and for methane from 5 ppm to 7,000 ppm. The sensor(s) should work in or near oil. While the location of the sensor heads should primarily be positioned in the headspace above the oil, ability to operate in oil could be an added, but not required feature. Sensing must take place at room temperatures. Optical or other types of non-arcing sensors may be desirable because this eliminates most danger from heat, flame, and arcing in what can be an explosive monitoring environment.

Respond to this TechNeed at:
www.techbriefs.com/tn/201106c.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

How Paper-based 3D Printing Works: The Technology and Advantages
Sponsored by Mcor Technologies
The True Cost of Bearing Lubrication
Sponsored by igus
Recruit Or Retain Report
Sponsored by Aerotek
Guidelines for Ensuring PCB Manufacturability
Sponsored by Sunstone Circuits
Estimating the Effort and Cost of a DO-254 Program
Sponsored by Logic Circuit
Physical Security Solutions For Healthcare Equipment
Sponsored by Southco

White Papers Sponsored By: