2011

Solution to Filter Light to High Specification

A firm seeks to identify spectral filter technologies to operate within a demanding optical environment. The technology solution will enable the suppression of out-of-band wavelengths above 100 nm, while exhibiting minimal loss to wavelengths of the order of 10 nm. The solution can be manufactured pinhole-free with an optical aperture of 180-200 mm in diameter. Structure and dimensions must be resilient to rapid thermal cycling over a prolonged period, and the solution would preferably be freestanding, i.e. not supported by a secondary layer. A supporting grid may be considered.

Respond to this TechNeed at:
www.techbriefs.com/tn/201106d.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

6 Ways Software Rendering Boosts Embedded System Graphics
Sponsored by ENSCO Avionics
Enhancing Ergonomics in Medical Equipment Design
Sponsored by Southco
3D Printing with FDM: How it Works
Sponsored by Stratasys
Bearing selection for low-speed applications
Sponsored by Kaydon
Software Defined Radio Handbook
Sponsored by Pentek
Recruit Or Retain Report
Sponsored by Aerotek

White Papers Sponsored By: