2012

Epoxy

The Polymer System EP37-3FLF from Master Bond (Hackensack, NJ) resists cryogenic temperatures and thermal cycling. The two-component epoxy, which features a low exotherm, functions as a potting, encapsulating, and casting system, especially where wider cross section thicknesses are specified. Serviceable over the range of 4K to 250°F, EP37-3FLF cures at room temperature in 2 to 3 days or faster at elevated temperatures. The product offers a non-critical 1-to-1 mix ratio by weight or volume, and a low mixed viscosity of 1,400 to 1,500 cps. Additionally, users can work with a 100 gram mass of the adhesive at room temperature for up to 90 minutes.

altEP37-3FLF has a bond shear strength exceeding 2,000 psi and a T-peel strength of 25 pli. The flexible epoxy has an elongation of 180% and superior electrical insulation properties with a volume resistivity of 1x1014 ohm-cm. It bonds to substrates including metals, glass, ceramics, rubbers, and many plastics.

For Free Info Visit: http://info.hotims.com/40429-211


White Papers

Bench Top Testing of Electromechanical Devices Using a 105-AVT Angular Vibration Table
Sponsored by Acutronic
SunWize Power Systems – Guidelines for Choosing the Right Product
Sponsored by SunWize
Changing Face of Robotics
Sponsored by Maplesoft
Medical Capabilities Brochure
Sponsored by Nordson EFD
OEM Optical System Development
Sponsored by Ocean Optics
Oscilloscope Fundamentals Primer
Sponsored by Rohde and Schwarz

White Papers Sponsored By: