2012

Power Over Ethernet (PoE) Cameras

Edmund Optics® (Barrington, NJ) has introduced new Power over Ethernet (PoE) Cameras. Each PoE camera includes software that allows users to set area of interest (AOI), gain, exposure, white balance, frame rate, trigger delay, and digital output (flash) delay and duration. The software can also implement edge enhancement, image mirroring and binning, and hot pixel correction.

altThe CE-, RoHS-, and GenICam-compliant camera is powered by either a PoE injector, which requires two GigE cables, or a PoE Computer Card. The camera can capture images in JPEG, Bitmap, or AVI format. Drivers for Direct Show (WDM), ActiveX, and TWAIN are included.

The device is available in 1⁄1.8", ½", and 1⁄3" sizes, in both color and monochrome models. The PoE interface meets IEEE 802.3af standards. Optional equipment is also offered, including a ¼- 20 Mounting adapter, a 5-m trigger cable, and a PCIe Board for two cameras.

For Free Info Visit http://info.hotims.com/40434-147

White Papers

Advances in Laser Welding Systems and Technology for Medical Device Manufacturing
Sponsored by Miyachi Unitek
Overcoming the Barriers Imposed by Geometry
Sponsored by SpaceClaim
Oscilloscope Fundamentals
Sponsored by Rohde and Schwarz A and D
It Takes Two: Benefits of Using Laser Beam Welding Together with Electron Beam Welding
Sponsored by Joining Technologies
An Alternative to Check Fixtures
Sponsored by Faro
All About Aspheric Lenses
Sponsored by edmund optics

White Papers Sponsored By: