PoE Cameras

Edmund Optics® (Barrington, NJ) has introduced new Power over Ethernet (PoE) cameras. Each device includes software that allows the user to set area of interest (AOI), gain, exposure, white balance, frame rate, trigger delay, and digital output (flash) delay and duration. The software can also implement edge enhancement, image mirroring and binning, and hot pixel correction.

altThe camera is powered by either a PoE injector, which requires two GigE cables, or a PoE Computer Card. The camera captures images in JPEG, Bitmap, or AVI format. Drivers for Direct Show (WDM), ActiveX, and TWAIN are included. The device is available in 1/1.8", ½", and 1/3" sizes, in both color and monochrome models. The PoE interface meets IEEE 802.3af, and the camera is CE, RoHS, and GenICam compliant. Optional equipment is also offered, including a ¼-20 mounting adapter, a 5-m trigger cable, and a PCIe board for two cameras.

For Free Info Visit http://info.hotims.com/40435-207

White Papers

Receiver requirements for a TDOA-based radiolocation system
Sponsored by rohde and schwarz a and d
External Power Supply Efficiency Regulation Introduction
Sponsored by mega electronics
3D Printing and the Future of Manufacturing
Sponsored by Stratasys
The Changing Face of Robotics
Sponsored by maplesoft
How Paper-based 3D Printing Works: The Technology and Advantages
Sponsored by Mcor Technologies
White Paper: MIL-STD-1553 IP Cores - An Emerging Technology
Sponsored by Sealevel

White Papers Sponsored By: