2012

Nozzles Provide Spray Pattern Consistency

Macrospray® nozzles produce consistent mists at very low pressure. The nozzles have a uniformly distributed droplet size (10–30 μm Sauter Mean Diameter), which provides greater contact between deodorant, for example, and odorcausing particles or dust. Droplet size can be tuned for the degree of dust particle interaction and “knock-down” required. The nozzles provide multiple tips for high flow.

The devices also have flow features chemically etched into bonded substrates, resulting in a monolithic structure. Nozzle passages, including metering slots, spin chambers, and exit orifices, are designed to minimize pressure drop to conserve pump energy. Hydraulically smooth internal surfaces reduce flow losses.

Get the complete report on this technology at:
www.techbriefs.com/tow/201208a.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

Uncooled Infrared Imaging: Higher Performance, Lower Costs
Sponsored by Sofradir EC
Thinking Outside of the Box: Optimizing System Design With Embedded Expertise
Sponsored by Curtiss Wright
How Lean Manufacturing Adds Value to PCB Production
Sponsored by Sunstone Circuits
Troubleshooting EMI in Embedded Designs
Sponsored by Rohde and Schwarz A and D
Force Sensors for Design
Sponsored by Tekscan
10 Ways to Make Your Wiring and Harness Design Faster and Better
Sponsored by Mentor Graphics

White Papers Sponsored By: