2012

Gauge Calibrates Three-Dimensional Coordinate Measuring Machine (CMM)

A gauge, which is used in examining the accuracy of a coordinate measuring machine (CMM), enables total calibration of errors and numbers of revisions of the measured values. The accurate calibration is possible for a CMM of any size. Various machines can also be calibrated by combining the gauge.

The CMM calibrating gauge consists of a block gauge and a fixed sphere. The coordinates of the sphere’s center and diameter can be specifically measured on the basis of the opposite end faces of the block gauge. Furthermore, the CMM calibrating gauge may have numbers of block gauges that are fixed together, allowing measured values to be revised repeatedly.

Get the complete report on this technology at:
www.techbriefs.com/tow/201209a.html
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 781-972-0600

White Papers

EtherCAT Solution Supercharges IoT-based Smart Factories
Sponsored by ADLINK Technology
Force Transfer Machines
Sponsored by Morehouse
TechTalk Design Advice Series: The Cable Distribution Rules You Need To Obey
Sponsored by Igus
From The Design Lab: An Insider’s Guide To Laser Sintering
Sponsored by Stratasys Direct Manufacturing
Evaluating Electrically Insulating Epoxies
Sponsored by Master Bond
Electronic Component Testing: A Non-contact Sport
Sponsored by Flir

White Papers Sponsored By:

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.