Materials & Manufacturing

Manufacturing & Prototyping

Topics:

Explore innovations supporting advances in manufacturing and rapid prototyping. Access the developments and solutions that have an impact on applications in 3D printing and automation.

36
0
30
30
Briefs: Materials
Developed by a team led by Lawrence Berkeley National Laboratory, a self-assembling nanosheet could significantly extend the shelf life of consumer products. And because the new material is recyclable, it could also enable a sustainable manufacturing approach that keeps single-use packaging and electronics out of landfills.
Feature Image
Briefs: Manufacturing & Prototyping
Researchers have unveiled a remarkable new material with potential to impact the world of material science: amorphous silicon carbide (a-SiC). Beyond its exceptional strength, this material demonstrates mechanical properties crucial for vibration isolation on a microchip. It is therefore particularly suitable for making ultra-sensitive microchip sensors.
Feature Image
Briefs: Imaging
The NIST camera is made up of grids of ultrathin electrical wires, cooled to near absolute zero, in which current moves with no resistance until a wire is struck by a photon. In these superconducting-nanowire cameras, the energy imparted by even a single photon can be detected because it shuts down the superconductivity at a particular location (pixel) on the grid. Combining all the locations and intensities of all the photons makes up an image.
Feature Image
Briefs: Manufacturing & Prototyping
Using 3D Bioprinting to Create Eye Tissue
The research team from the National Eye Institute printed a combination of cells that form the outer blood-retina barrier — eye tissue that supports the retina’s light-sensing photoreceptors. The technique provides a theoretically unlimited supply of patient-derived tissue to study degenerative retinal diseases such as age-related macular degeneration.
Briefs: Manufacturing & Prototyping
A stretchable system that can harvest energy from human breathing and motion for use in wearable health-monitoring devices may be possible, according to an international team of researchers.
Feature Image
Briefs: Manufacturing & Prototyping
The ventilators are simpler and cheaper to make than those currently available.
Feature Image
White Papers: Green Design & Manufacturing
Document cover
The Importance of testing EVB Minerals with Processing Equipment used during the Mid-Stream Phase

This white paper looks at the supply chain of Electric Vehicle Batteries (EVB’s) and the importance of testing EVB minerals with the...

White Papers: Mechanical & Fluid Systems
Document cover
From Zero to Fully Automated Screw Fastening

While automation technology has evolved from waterpower and steam engines to the proliferation of electric cars, internet of things (IoT) technologies and the advanced computational abilities...

On-Demand Webinars: Manufacturing & Prototyping
Feature Image

Modern extrusion technology offers manufacturers a chance to create more complex profiles that “put the metal where it is needed.” Complex hollow shapes offer...

White Papers: Energy
Document cover
How Michelin is Upgrading Plant Operations and Energy Systems to Achieve Sustainability Goals

Michelin selected ENGIE to drive energy modernization at its Cuneo and Cataroux factories. In addition to utilities management, the collaboration...

Blog: Research Lab
This marks the first time researchers have used the technology to generate hair follicles, which play an important role in skin healing and function.
Feature Image
On-Demand Webinars: Manufacturing & Prototyping
Feature Image

Early additive manufacturing (AM) adopters in the aerospace industry are leveraging advanced 3D printing technologies from industry leaders like HP and...

Q&A: Manufacturing & Prototyping
Michael Kirka and a team of researchers at the Department of Energy’s Oak Ridge National Laboratory are the first to 3D print large rotating steam turbine blades. They achieved it with robot-controlled wire arc additive manufacturing.
Feature Image
Quiz: Manufacturing & Prototyping
Through its Commercial Lunar Payload Services (CLPS) initiative, NASA is working with several U.S. companies to accelerate a robotic return to the Moon. Test your knowledge about commercial lunar landers in this quiz.
Feature Image
Quiz: Test & Measurement
One of the benefits of modern digital technology is that industrial maintenance can be done in a more efficient way than ever before, by using a process called predictive maintenance (PdM). See how much you understand about it — take this quiz.
Feature Image
Blog: Robotics, Automation & Control
Software is a key component of automation, and with AI, software developers will be able to create more customized and optimized solutions for various tasks and challenges.
Feature Image
Products: RF & Microwave Electronics
See the product of the month, 3D Systems' SLS 300 smaller-footprint 3D printer designed for use in settings other than a manufacturing floor.
Feature Image
Articles: Manufacturing & Prototyping
To make fusion power not only physically possible but also economically possible, we need to develop high-performance fusion reactors. However, these reactors call for high-performance materials.
Feature Image
Products: Electronics & Computers
See what's new on the market, including Keystone Technologies' THM Test Points, Nikon IMBU's CT systems for non-destructive inspection, Renesas' SoCs and MCUs, Rad Source NDT's X-ray Inspection System, the Precision Specimen Loader from Instron, and more.
Feature Image
Videos of the Month: Manufacturing & Prototyping
See the videos of the month, including one on FibeRobo, a novel body-temperature shape-changing fiber based on liquid crystal elastomers; one on 3D printing extremely viscous plastic solids; one on using digital twins in EV battery design and testing; and one on flexible sensors screen-printed onto a stamp-like flexible surface.
Feature Image
Articles: Design
This feature explores five transformative currents shaping the future of manufacturing and heralding a new era of improved production, efficiency, and sustainability.
Feature Image
Briefs: Sensors/Data Acquisition
A Molecular-Sized, More Efficient Electronic Sensor
Australian researchers have developed a molecular-sized, more efficient version of a widely used electronic sensor, in a breakthrough that could bring widespread benefits.
Articles: Software
This new era of technology eases the twin challenges of capacity and complexity and offers more flexibility than ever for businesses to respond to a fast-changing world.
Feature Image
Articles: Information Technology
The next evolution in mobile networks is on the horizon with 6G. Set to surpass 5G with enhanced speed, reduced latency, and expanded capacity, countless applications will benefit. Manufacturing is anticipated to be one of the greatest beneficiaries.
Feature Image
Articles: Information Technology
According to researchers, Interconnected Digital Twins will challenge existing understanding of value creation and capture. The discrete and composite twins will be integrated within and between manufacturing firms and other key stakeholders.
Feature Image
Articles: Information Technology
Extended reality (XR) technology has emerged as a key catalyst for innovation, offering a spectrum of benefits that redefine the way industries operate.
Feature Image
Briefs: Green Design & Manufacturing
Macquarie University engineers have developed a new technique to make the manufacturing of nanosensors far less carbon-intensive, much cheaper, more efficient, and more versatile — substantially improving a key process in this trillion-dollar global industry.
Feature Image
Briefs: Robotics, Automation & Control
Using a new type of dual-polymer material capable of responding dynamically to its environment, researchers have developed a set of modular hydrogel components that could be useful in a variety of soft robotic and biomedical applications.
Feature Image
Briefs: Sensors/Data Acquisition
A team at ETH Zurich has developed an ultrasonically actuated glass needle that can be attached to a robotic arm. This lets them pump and mix minuscule amounts of liquid and trap particles.
Feature Image

Videos