Figure 3. When analyzing a wind turbine blade, HyperSizer software performs panel swaps to identify the optimal design criteria for a particular region of a wind blade; minimizes ply drops to cut costs, improve manufacturability, and increase fatigue life; and works with finite element analysis (FEA) software to redefine zones of laminate thickness and then calculate loads to be used in its optimization routines.
To meet these tougher requirements, earlier all-fiberglass wind blade designs are being redesigned to incorporate more structurally complex sections made of a mix of fiberglass with higher-performance graphite epoxy (carbon-fiber) similar to that seen in the aerospace industry. Of course, these newer composite materials require a more sophisticated design engineering approach, as well as different handling, fabrication, and curing methods.

This is where HyperSizer’s capabilities can be put to use as designers incorporate the aerodynamics lessons learned from aviation into wind blade structure and function. Among the issues for which the software provides insight are:

  • The optimal number of shear webs (spars) and their placement.
  • Whether to go with solid laminate versus sandwich or stiffened panels for unsupported areas.
  • How to properly proportion the material around the chord of the blade (from leading edge to trailing edge), and then down its length.
  • What is the strongest carbon-fiber/fiberglass percentage combination and layup stacking sequence that can be achieved at the lowest weight?
  • How do you arrive at the optimum balance of least-complex, lightest-weight composite tape and fabric layup sequencing with minimal ply drops that results in the lowest fabrication costs within a 24-hour production cycle?

The sooner these questions can be answered in preliminary design, the more energy- and cost-efficient the final wind blade will be. The software surveys thousands and even millions of design-candidate dimensions and laminates, quickly evaluating early designs in a ply-by-ply, and even finite element-by-element, manner. By sizing (optimizing) all possible permutations and combinations of composite laminate, the software gives engineers a highly accurate picture of the consequences of proposed design changes (Figure 3). Structural integrity is verified, failure modes are predicted for aeroelastic load cases, and required safety factors are achieved. Designs can be fine-tuned in this way to simultaneously target optimum manufacturability, minimum weight, and lowest cost, all of which can help wind power be more competitive with fossil fuels.

« Start Prev 1 2 3 4 Next End»

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.