If you want to learn about designing for additive manufacturing (3D printing) with apps, then tune into this webinar with guest speaker Borja Lazaro Toralles of the Manufacturing Technology Centre.

Additive manufacturing has achieved great popularity through the use of polymers in prototyping. From there, it has moved on to the use of metal alloys in the manufacturing of production components, where geometric distortion can occur when the heat source melts too far into the deposited layers and generates new thermal stresses. Residual stresses can warp the final geometry, which may have an adverse impact in applications with tight tolerance requirements in high-value manufacturing.

In this webinar, we will show how to use numerical simulation to investigate this phenomenon with the COMSOL Multiphysics® software. This includes how to create a customized app that readily allows different teams to perform analyses. Following a live demonstration in the software, you can ask questions during the Q&A session.


Borja Lazaro Toralles, Team Leader, Physics Modelling Department, MTC
Valerio Marra, Marketing Director, COMSOL

Click here to view webinar

White Papers

Key Considerations for Powertrain HIL Test
Sponsored by National Instruments
Metal Stamping Design Guidelines
Sponsored by Larson Tool
Introduction to Machine Vision Inspection
Sponsored by Cognex
Guide to Electrical Safety Testing
Sponsored by Ikonix
ABLE TECHNICAL GUIDE: Your Solution to 7 Metal Surface Problems
Sponsored by Able Electropolishing
Breakthrough Energy Innovation: Ambition and Urgency
Sponsored by ANSYS

White Papers Sponsored By:

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.