Tech Needs of the Week
- Created on Thursday, 29 March 2007
Technical assistance is needed for the manufacture of serrated, scalloped (concave), and wavy (convex) bandknife blades. Of interest are 14 and 16 TPI (teeth per inch) by blanking for the serrated edge. Blanking has been achieved for the scalloped edge, but the resulting shape is not satisfactory. Blanking was not achieved for the wavy edge utilizing the current machine. To respond to this Tech Need, click here.
Screen-printing, foil-stamping, or laser-marking methods are needed to engrave permanent markings on stainless steel. The method will be used on both flat surfaces and curvatures. The visibility of the engravings must be clear and prominent. The method will be used on stainless steel dining ware and cups/mugs. To respond to this Tech Need, click here.
The Technology Needs of the Week are anonymous requests for technology, distributed through the yet2.com marketplace, that you and your organizationmay be able to fulfill. Responding to a Tech Need is the first step to gaining an introduction with a prospective "buyer" for your technology solution.