The MCRT® 79700V digital torquemeter from S. Himmelstein and Company (Hoffman Estates, IL) has two ranges with independent outputs. The meter measures torque even if the ratio of peak to average torque is high. Such conditions occur when starting, stopping, or reversing high-inertia loads, during torsional oscillations, and in single-cylinder engine/compressor drivelines. Three simultaneous analog outputs can be individually set to 5 or 10V at each range, full scale. Digital output of torque, and speed and power with option Z, is available over the resident RS-232 serial port. Included software interfaces with Windows-based PCs for data display and collection, as well as instrument setup.