The TA2230 constant velocity drive from Trust Automation (San Diego, CA) is designed to run a brushless motor at a constant velocity using the motor’s ll sensors for the velocity feedback. Using an RS232 interface, the drive can be programmed at start-up to ramp up at a preset rate and maintain a constant velocity, regardless of load changes.

altWith the optional cooling fans, the brushless motor drive measures 9.3 in. × 3.5 in. × 5.7 in. Motor output from the drive with an AC supply of 100 to 220 VAC @ 50/60 Hz, 25-A peak current. The DC voltage is 0-330 VDC at 45 Amp peak, 20 Amp RMS continuous.

The drive’s speed can be set through an external potentiometer, an on-board potentiometer, or via software commands. Other features include soft-start control, integral AC line filtering, and an optically isolated user interface. Software-configurable parameters include enable input level, fault output level, coast input level, target velocity, Hall active level, and current limit.

For free info Visit

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.