A report describes the personal radiation protection system (PRPS), which has been invented for use on the International Space Station and other spacecraft. The PRPS comprises walls that can be erected inside spacecraft, where and when needed, to reduce the amount of radiation to which personnel are exposed. The basic structural modules of the PRPS are pairs of 1-in. (2.54-cm)-thick plates of high-density polyethylene equipped with fasteners. The plates of each module are assembled with a lap joint. The modules are denoted bricks because they are designed to be stacked with overlaps, in a manner reminiscent of bricks, to build 2-in.(5.08-cm)-thick walls of various lengths and widths. The bricks are of two varieties: one for flat wall areas and one for corners. The corner bricks are specialized adaptations of the flat-area bricks that make it possible to join walls perpendicular to each other. Bricks are attached to spacecraft structures and to each other by use of straps that can be tightened to increase the strengths and stiffnesses of joints.

This work was done by Mark McDonald of Johnson Space Center and Victoria Vinci of Johnson Engineering Corp. For further information, contact:

Johnson Engineering Corp.

18100 Upper Bay Road

Suite 220 Houston

TX 77058-3547

Phone: (281) 333-9729

Refer to MSC-23330.

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.