Materials & Coatings

This technology provides permanent, flexible, and less intrusive wire repairs.

NASA’s Kennedy Space Center (KSC) seeks to license its Polyimide Wire Insulation Repair System technology to industry. The Polyimide Wire Insulation Repair System is a kit consisting of thin film polyimide patches that are applied to damaged areas of wire insulation with a heating device that adheres the polyimide repair film into place. The technology has been prototyped and successfully tested by NASA and the Naval Air Systems Command (NAVAIR). Wire repairs made with this system are permanent, flexible, and much less intrusive than repairs made using current techniques and materials. The technology is well suited for all applications of polyimide and other high-performance polymer- jacketed wire constructions.

The wire repair heating tools (left) and repaired wires (right).

A major limitation of current aerospace wire insulation is that it tends to crack and fray as it ages, and is easily damaged. Generally, it is more cost-effective to repair wire insulation than to replace a section of the wire (or bundle) itself. Current repair methods include a tape wrap repair and a heat shrink repair. These methods have a number of drawbacks: susceptibility to vibration, fluid intrusion, and other mechanical stresses. The repair patch/material can loosen or separate, exposing the bare metal conductor or opening the polyimide insulation to more damage at the interface.

The technology developed by KSC is a flexible polyimide film patch (either wrap or sleeve) that is heated with a custom heating tool to melt, flow, and cure the film. The new technology results in hermetically sealed, permanent repairs that are much more flexible and less intrusive than repairs made using current practices. The repair remains flexible after application, has no limit in length or bend radius, and retains the high-temperature exposure of the original polyimide insulation. Extensive testing by NASA and NAVAIR has demonstrated that these repairs comply with industry standards for tensile strength, electrical resistivity, voltage breakdown, solvent resistance, and flammability. This system is adaptable and may also be used on larger-gauge wiring, as well as flat-ribbon wire harnesses and twisted shielded wires.

Potential applications include aerospace, automotive, marine, and industrial wiring.

NASA is actively seeking licensees to commercialize this technology. Please contact Lew Parrish at This email address is being protected from spambots. You need JavaScript enabled to view it. to initiate licensing discussions. Follow this link for more information: http://technology.nasa.gov/patent/TB2016/KSC-TOPS-35.

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.