Home

radEq Add-On Module for CFD Solver Loci-CHEM

The radEq software module allows Loci-CHEM to be applied to flow velocities where surface radiation due to heating from compression and friction becomes significant. The module adds a radiation equilibrium boundary condition to the computational fluid dynamics (CFD) code to produce accurate results. The module expanded the upper limit for accurate CFD solutions of Loci-CHEM from Mach 4 to Mach 10 based on Space Shuttle Orbiter Re-Entry trajectories.

Loci-CHEM already has a very promising architecture and performance, but absence of radiation equilibrium boundary condition limited the application of Loci-CHEM to below Mach 4. The immediate advantage of the add-on module is that it allows Loci-CHEM to work with supersonic flows up to Mach 10. This transformed Loci-CHEM from a rocket engine-heritage CFD code with general subsonic and low-supersonic applications, to an aeroheating code with hypersonic applications. The follow- on advantage of the module is that it is a building block for additional add-on modules that will solve for the heating generated at Mach numbers higher than 10.

This work was done by Peter McCloud of The Boeing Company. For further information, contact the JSC Innovation Partnerships Office at (281) 483-3809.

Title to this invention has been waived under the provisions of the National Aeronautics and Space Act {42 U.S.C. 2457(f)} to The Boeing Company. Inquiries concerning licenses for its commercial development should be addressed to:

   The Boeing Company
   2201 Seal Beach Boulevard
   P.O. Box 2515
   Seal Beach, CA 90740-1515

MSC-24848-1