Elma Bustronic Corporation (Fremont, CA) has introduced a new 6U VPX Load Board that helps confirm the chassis meets the VITA 46/48 power specifications for VPX and aids in locating hot spots within the enclosure. The 6U VPX load card features a microcontroller-based stepped load control to 100W maximum. Go-No-Go indicators are present for 3.3V, 5V, 12V, +12V_Aux, -12V_Aux and 3.3V_Aux. The rotary switch selects the voltage setting while pushing the ON switch will cycle between different power levels shown on the LED display. The set load power levels are saved in EEPROM. Other features include a power reset button (to minimum level) and a SYSRESET signal on the two test point outputs.