3D Display Using Conjugated Multiband Bandpass Filters
- Created on Tuesday, 01 May 2012
Stereoscopic display techniques are based on the principle of displaying two views, with a slightly different perspective, in such a way that the left eye views only by the left eye, and the right eye views only by the right eye. However, one of the major challenges in optical devices is crosstalk between the two channels. Crosstalk is due to the optical devices not completely blocking the wrong-side image, so the left eye sees a little bit of the right image and the right eye sees a little bit of the left image. This results in eyestrain and headaches.A pair of interference filters worn as an optical device can solve the problem. The device consists of a pair of multiband bandpass filters that are conjugated. The term “conjugated” describes the passband regions of one filter not overlapping with those of the other, but the regions are interdigitated. Along with the glasses, a 3D display produces colors composed of primary colors (basis for producing colors) having the spectral bands the same as the passbands of the filters. More specifically, the primary colors producing one viewpoint will be made up of the passbands of one filter, and those of the other viewpoint will be made up of the passbands of the conjugated filter. Thus, the primary colors of one filter would be seen by the eye that has the matching multiband filter. The inherent characteristic of the interference filter will allow little or no transmission of the wrong side of the stereoscopic images.
This work was done by Youngsam Bae and Victor E. White of Caltech, and Kirill Shcheglov of SBC Global for NASA’s Jet Propulsion Laboratory. NPO-47578
This Brief includes a Technical Support Package (TSP).
3D Display Using Conjugated Multiband Bandpass Filters (reference NPO-47578) is currently available for download from the TSP library.
Please Login at the top of the page to download.