Portable Handheld Optical Window Inspection Device
- Created on Monday, 01 November 2010
This device allows field measurement of defects such as commercial aircraft windows.
The Portable Handheld Optical Window Inspection Device (PHOWID) is a measurement system for imaging small defects (scratches, pits, micrometeor impacts, and the like) in the field. Designed primarily for window inspection, PHOWID attaches to a smooth surface with suction cups, and raster scans a small area with an optical pen in order to provide a three-dimensional image of the defect. PHOWID consists of a graphical user interface, motor control subsystem, scanning head, and interface electronics, as well as an integrated camera and user display that allows a user to locate minute defects before scanning. Noise levels are on the order of 60 μin. (1.5 μm).
PHOWID allows field measurement of defects that are usually done in the lab. It is small, light, and attaches directly to the test article in any orientation up to vertical. An operator can scan a defect and get useful engineering data in a matter of minutes. There is no need to make a mold impression for later lab analysis.
The PHOWID system components consist of a scanning head, motor control board, graphical user interface, and supporting electronics, and weighs approximately 5 pounds (2.3 kg). The scanning head consists of an x–y positioner, optical distance sensor, carrier plate, and vacuum supplied suction cups. The head has an integrated camera and LCD (liquid-crystal-display) screen that allows a user to easily position it above the defect. Vacuum is supplied to suction cups through a dual circuit system, which includes check valves to hold the head against the window or other smooth surface up to 90° inclination in the event that the vacuum source is lost. The graphical user interface (GUI ) displays the surface image and allows the user to describe an area of interest to be scanned at various speeds and resolutions. The GUI displays the scanning progress in real time. Once a scan is completed, software provides the automated measurement capability to determine defect length, width, and depth and will store this information in a file. The GUI also communicates with the motion control electronics. These electronics control the x–y positioning motors that move the optical sensor in the sensor head. These electronics also combine the depth and position data in real time and stream the data to the GUI. The associated electronics box contains the vacuum pumps, optical-sensor conditioning electronics, and power supplies.
Functionally, the user places PHOWID over the defect using the integrated camera. The user selects the desired area, resolution, and scan speed at the laptop GUI and initiates scanning. PHOWID has a depth range of 0.01 in. (0.25 mm). It has a noise floor better than 60 μin. (1.5 μm). Usable scan area is on the order of an inch square. Smallest resolution of the scan in the x–y direction is on the order of 300 μin. (7.6 μm).
This work was done by Curtis Ihlefeld and Adam Dokos of Kennedy Space Center and Bradley Burns of ASRC Aerospace Corporation. For more information, download the Technical Support Package (free white paper) at www.techbriefs.com/tsp under the Physical Sciences category. KSC-13218