Tech Briefs

This technology can be used for tents, bags, barometric chambers, or wherever environmental barriers are needed.

An airlock used in space can provide the ability to leave a pressurized volume and enter free space. This is necessary to perform maintenance or make repairs to the pressurized volume or visiting spacecraft, construct or repair structures or devices, tend in-space experiments, etc. The airlock is used to provide the transition between internal pressurized volume, i.e. a shirtsleeve environment, and space. Current state-of-the-art units on the Space Station are rigid systems consisting of massive pressure vessels, hatches, and seals. Past efforts have investigated fabric-based ways of forming the airlock pressure volume, but all have used a more traditional metallic or composite door or hatch, which are heavy and difficult to package into a small volume. The need exists for an airlock, pressure vessel, and opening that are lightweight and can be packaged efficiently.

Deployed airlock with entry transition structure from vehicle between axial cords (left), and the packaged airlock prior to deployment (right).

The innovation described here is a unique structural architecture that enables a linear seal to be used to form a large aperture without experiencing cross loads. The corresponding flexible linear seal provides a way to create an aperture (i.e. opening, hatch, or door) that is lightweight and can be collapsed and folded along with the fabric airlock. The fabric-based aperture is highly scalable and can be used where it is desirable to isolate volumes with different environmental characteristics.

Compared to the state-of-the-art seal systems, the unique structural architecture and aperture seals proposed here are lightweight and can be folded or rolled to package compactly. The seals can be scaled for any size aperture, and can be configured for automatic activation. Redundant seals can be integrated with a small mass and packaging penalty. Because the seals can be formed from the same materials used to form the bladders in inflatable systems, they can be directly integrated with the inflatable materials used to form the airlock or pressure vessel. In this case, the seals do not require interfacing structure traditionally found when inflatable materials are interfaced to metallic or composite components.

This work was done by William Doggett, Gerard Valle, Molly Selig, Winfred Kenner, Thomas Jones, Judith Watson, Lynn Bowman, Maryjane O’Rourke, Bryan Yount, Alberto Makino, John Dorsey, Russell Smith, Clarence Stanfield, and Jasen Raboin of Langley Research Center; and Timothy Roach of Team2. NASA is seeking partners to further develop this technology through joint cooperative research and development. For more information about this technology and to explore opportunities, please contact This email address is being protected from spambots. You need JavaScript enabled to view it.. LAR-18481-1

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.