Critical Techniques for High-Speed A/Ds In Real-Time Systems Handbook

To help define the meaning of “high-speed A/D” used in this handbook, we will be focusing primarily on A/D converters with sampling rates higher than 100 MHz. We will review sampling techniques, FPGA technology and we will present the latest Pentek high-speed A/D products and applications based on them.

Posted in: White Papers, White Papers, Electronics & Computers
Read More >>

Software-Defined Radio Handbook

SDR (Software-Defined Radio) has revolutionized electronic systems for a variety of applications including communications, data acquisition and signal processing.This handbook shows how DDCs (Digital Downconverters) and DUCs (Digital Upconverters), the fundamental building blocks of SDR, can replace legacy analog receiver and transmitter designs while offering significant benefits in performance, density and cost.

Posted in: White Papers, White Papers, Electronics & Computers
Read More >>

Putting VPX and Open VPX to Work

Before the advent of OpenVPX, designers of embedded systems took advantage of the extreme connectivity offered by VPX (VITA 46), but were faced with a virtually unlimited number of possible implementations. Specific choices for the control and data channel assignments for each slot, the backplane connectivity, and serial fabrics were often made somewhat arbitrarily to suit the particular needs of the current system. Although following the general framework of VITA 46, each system tended to be so unique, that the boards and backplanes designed for one system were seldom usable in other systems, even from the same vendor.

Posted in: White Papers, White Papers, Electronics & Computers
Read More >>

Understanding Low Outgassing Adhesives

Engineers often want to know whether an adhesive is low outgassing or generic. While there are cases when nothing but a low outgassing product will do, the truth is that many so-called generic adhesives inherently have low outgassing levels. What's more, most bonding, potting, encapsulation and sealing applications don't need to meet a defined outgassing specification. Check out Master Bond’s guide to understanding when low outgassing adhesives are the right choice.

Posted in: White Papers, White Papers, Coatings & Adhesives, Materials, Medical
Read More >>

Integrating Novel Materials to Improve Medical Device Performance

Today’s implantables are highly engineered assemblies with multiple complex elements that require innovative materials and sophisticated manufacturing. The development and use of new and novel materials and processes has enabled advances in both medical device performance and patient safety. Whether it’s a lighter material, a smoother surface, or a process that can be automated and repeatable, advanced technologies such as scratch-free surfaces or specialized coatings for stimulation can help extend or improve the life of implantable devices.

Posted in: White Papers, White Papers, Coatings & Adhesives, Materials, Bio-Medical, Medical, Lasers & Laser Systems, Photonics
Read More >>

Pedal Position Sensing in Heavy-Duty Vehicles

Pedal position detection is nothing new when it comes to operation of heavy duty equipment. However, the age old system operation of mechanical linkages between the pedal and the engine just might be coming to an end. New sensor technology is now enabling non-contact, drive-by-wire that can reduce total system cost while standing up to the harsh environments of off highway equipment.

Posted in: White Papers, Fluid Handling, Mechanical Components, Motion Control, Data Acquisition, Sensors
Read More >>

Evaluating the Chemistry of Brake Pads using SEM-EDS

Brake pads are a critical part of a vehicle’s overall braking system. With the broad diversity of available brake pad types, sub-types and unique chemistries there is an open question as to which brake pad provides the best overall performance.

Posted in: White Papers, Automotive, Manufacturing & Prototyping, Materials
Read More >>

dB or not dB? Everything you ever wanted to know about decibels but were afraid to ask...

True or false: 30 dBm + 30 dBm = 60 dBm? Why does 1% work out to be -40 dB one time but then 0.1 dB or 0.05 dB the next time? These questions sometimes leave even experienced engineers scratching their heads. Decibels are found everywhere, including power levels, voltages, reflection coefficients, noise figures, field strengths and more. What is a decibel and how should we use it in our calculations? This Application Note is intended as a refresher on the subject of decibels.

Posted in: White Papers, White Papers, Aeronautics, Defense, RF & Microwave Electronics
Read More >>

How to Make Low Flow Measurements Using Turbine Flow Meters

Accurate low flow measurement represents significant challenges in many applications. Some typical low flow applications in the aerospace market include: small UAV fuel consumption, satellite thruster fuel consumption, and fuel/chemical/water injection. The low dynamic energy associated with flow rates down to 0.001 GPM exceed the capabilities of most mechanical flow meters and force the use of less accurate flow meter technologies.

Posted in: White Papers, Mechanical Components, Data Acquisition, Sensors, Instrumentation
Read More >>

DIGITAL PATHOLOGY: A Primer for Microscope Camera Selection

Most pathologists today use digital systems within their practices and research projects to communicate, store data, and analyze images. Whether it’s within clinical, forensic, surgical, or other branches of pathology, communication and consultation among specialists is greatly improved by the use of digital systems and enables faster diagnosis for patients.

Posted in: White Papers, Imaging, Medical, Optics, Photonics
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.