Home

Biodegradable Silica Gel Fiber Regenerates Cell Tissue

An inorganic, biodegradable silica gel fiber (SGF) acts as a physical scaffold to aid the growth of new cells and the collagen structure that supports them. As a scaffold, it can also be used to deliver drugs over a wide area to aid in healing. The material is integrated into the tissues and resorbed by the body. Unlike collagen, the SGF scaffold stays in the wound for 1–2 weeks before resorption. Dimension as well as degradation speed can be adjusted from millimeters up to several hundred square centimeters.

Posted in: Techs for License

Read More >>

Nozzle Produces Ultrafine Droplets

Energy-saving nozzles offer droplet sizes down to 25 microns, at operating pressures as low as 100 psi. Nozzle passages, including metering slots, spin chambers, and exit orifices, are designed to minimize pressure drop, resulting in conservation of pump energy up to the exit orifice.

Posted in: Techs for License

Read More >>

Piezoelectric-Actuated Valves Bring Accuracy to Process Control Systems

The PACE Hf, a high-flow proportional valve utilizing a Parker Advanced Technology actuator, delivers 180 slpm of air at 30 psi. The product has low power requirements: steadystate 0.6 Watts max, cycling 15 Hz, 1.2 Watts. The Viva piezoelectric actuator provides repeatability and accuracy for the valve of 0.25% variability in 10 ms cycle times.

Posted in: Techs for License

Read More >>

Synthetic Material Offers Touch-Feel of Genuine Leather

A synthetic leather material delivers a durable touch-feel. The design is based on the way that the human fingertip interacts with surfaces along four different axes of material properties. The fingertip determines whether a surface is soft or hard, smooth or coarse, wet or dry, and warm or cold. By discovering the relationship between the fingertip and the sensations produced by feeling high-quality, hide-based material, engineers set the appropriate physical properties.

Posted in: Techs for License

Read More >>

Mirror Switches Between Reflective and Transparent States

A flexible mirror film electrically switches between reflective and transparent states. By applying (+) voltages, hydrogenation occurs and creates transparency. When (-) voltages are used, the switchable mirror returns to its original reflective state within 10 seconds. The technology allows switchlevel control of the passage of solar radiation, thereby reducing cooling load.

Posted in: Techs for License

Read More >>

Hovering Aerial Vehicles Use Wireless Energy Supplied from Ground

New electrically charged, polarized, proprietary alloys create thrust to lift small aircraft, commonly referred to as Personal Ultralight Vehicles (PAVs), without the need of a propeller, jet, balloon, or rockets. The ion electric air propulsion is considered a clean technology that has none of the carbon emissions or volatile fuels involved with combustion engines. A ground-based broadcast power system and onboard rectenna eliminates the need for onboard power storage and results in more lift range and higher payload.

Posted in: Techs for License

Read More >>

Fast-Charge Technology Finds Battery “Sweet Spot”

A technology recharges batteries in up to one-tenth the time of conventional methods. The device creates conditions within the battery that allow power to be input as fast as the cell can accept the charge. By creating a charging “ecosystem,” the optimum battery charging conditions are present which, in turn, cause the necessary redox reactions to occur at a very fast rate, with little to no side reactions occurring from an input of excess energy.

Posted in: Techs for License

Read More >>