Home

IoT Device Battery Analysis

Explore how engineers address the consumer, industrial and medical demand for ever-longer battery life from IoT devices. Learn the tools used to provide insight into an IoT device’s complex battery consumption waveforms and how designers and manufacturers can create new ways to extend the battery life. Download Application Note.

Posted in: White Papers, White Papers, Energy Efficiency, Electronics & Computers, Bio-Medical, Medical

Read More >>

Common Workflow Service: A Standards-Based Process Management System

As mission operations grow in scale and complexity, there is a prevailing need for automating operational processes to increase efficiency, mitigate risks, and reduce operational costs. The need for automating operational processes has produced a few disparate automation systems within the Advanced Multi Mission Operations System (AMMOS). Without a common solution for process management and automation, each AMMOS subsystem that requires a workflow capability will need to develop its own expertise in the workflow domain as independent systems are developed. This can lead to many incompatible implementations that functionally do similar things. The Common Workflow Service (CWS) attempts to address this issue to avoid independent ad hoc workflow implementations.

Posted in: Briefs, Electronics & Computers, Information Sciences, Software

Read More >>

NEQAIR v14.x Non-Equilibrium Radiative Transport and Spectra Program

There is a need to calculate the radiative heating rate at the surface of a vehicle entering any atmosphere, (e.g., Earth, Saturn, Titan, Mars, Venus etc). NEQAIR simulates the actual chemical and physical actions and reactions of the gaseous species in high-temperature shock layers. NEQAIR has been NASA’s main radiation code for the past 30 years. It is a line-by-line radiation code that computes spontaneous emission, absorption, and stimulated emission due to transitions between various energy states of chemical species along a line of sight. There have recently been substantial updates to the physics in the code and the computational efficiency in NEQAIR; v14.0 is the first parallelized version that has resulted in calculations speeding up by a factor of approximately 30×.

Posted in: Briefs, Electronics & Computers, Information Sciences, Software

Read More >>

Systems Engineering Education and Development (SEED) Web Application

This application serves as Web-based management of the Systems Engi - neering Education and Development (SEED) program, and enables the SEED Program Manager to track and manage the applications and assignments. In the past, the handling of the applications and assignments was cumbersome due to a manual process with paper copies of competencies and applicant data. The new system enables the automation of the entire process to streamline determination of both the viability of the applicants and the effectiveness of the program on the participants through the course of their time in the program.

Posted in: Briefs, Electronics & Computers, Information Sciences, Software

Read More >>

Hammer 1.0

Many software applications have scripting needs including those based on the Goddard Mission Services Evolution Center (GMSEC) framework. In GMSEC, a user may want to automate the actions to take when a sequence of events occurs. Ideally, the scripting solution should allow the use of a familiar programming language and avoid unnecessary constraints. The existing GMSEC Criteria Action Table (CAT) is limited in these respects.

Posted in: Briefs, Electronics & Computers, Information Sciences, Software

Read More >>

Extended Testability Analysis (ETA) Tool V8.0

This tool provides fast, efficient, and effective diagnostic assessment reports.An assessment of a system’s safety requirements is required early in the design process when cost and time impacts are minimal. These requirements include fault detection, failure isolation, and failure recovery. Systems engineering groups at NASA have been exploring model-based products to better support verification of these safety requirements. One such product involves qualitative failure propagation modeling as a means to achieve early assessment of the system prior to the availability of higher fidelity information. These early development products lack the advanced reporting and analysis capabilities required to address the needs of system designers and domain experts. Therefore, post-processing tools need to be developed to support the interrogation of the model, and the structured reporting required by system engineers.

Posted in: Briefs, Electronics & Computers, Information Sciences, Software

Read More >>

Special Edition: Simulation Gets Personal

To drive sustainable innovation your research and development teams need creative and collaborative ways to think about product, nature, and life working together in harmony.

Posted in: White Papers, Electronics & Computers, Software

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.