Two documents present updates on thin-shell, adjustable, curved mirrors now being developed for use in spaceborne imaging systems.  These mirrors at an earlier stage of development were reported in “Nanolaminate Mirrors With Integral Figure-Control Actuators” (NPO-30221), NASA Tech Briefs, Vol. 26, No. 5 (May 2002), page 80. To recapitulate: These mirrors comprise metallic film reflectors on nanolaminate substrates that contain “in-plane” actuators for controlling surface figures with micronlevel precision. The actuators are integral parts of the mirror structures, typically fabricated as patches that are bonded onto the rear (nonreflective) surfaces of the mirror shells. The current documents discuss mathematical modeling of mirror deflections caused by actuators arranged in unit cells distributed across the rear mirror surfaces. One of the documents emphasizes an actuator configuration in which a mirror surface is divided into hexagonal unit cells. Each unit cell contains four rectangular actuator patches in an off-axis cruciform pattern to induce a combination of bending and twisting. For deflections to reduce certain optical aberrations, it is found that, relative to other configurations, this configuration involves a smaller areal density of actuators.

This work was done by Gregory Hickey, Shyh-Shiuh Lih, and Horn-Sen Tzou of Caltech for NASA’s Jet Propulsion Laboratory. For further information, access the Technical Support Package (TSP) free on-line at www.techbriefs.com/tsp under the Materials category.
NPO-30748

This Brief includes a Technical Support Package (TSP).

Patched Off-Axis Bending/Twisting Actuators for Thin Mirrors (reference NPO-30748) is currently available for download from the TSP library.

Login first to download.

Username

Password

Remember me


Lost Password? Register