Electrical/Electronics

Wire Bonding to Pads in Tilted Planes

This technique can be used in industries where devices need to be made smaller and lighter, such as medical, aerospace, automotive, and military.Scientific imaging arrays need to have their individual imaging elements arranged in a close-spaced mosaic. The typical single imaging element is a silicon chip mounted on a larger support frame. This excess area of the support frame takes away valuable imaging space from the mosaic. This appears as a grid of black (no data) in the overall mosaic image. Making the support frame smaller makes the amount of lost data smaller, and the imaging elements can be spaced more closely together. Eliminating the support frame altogether brings the imaging elements even closer. This is referred to as four-side buttable.

Posted in: Briefs, TSP, Electronics & Computers, Imaging and visualization

Read More >>

cFE/CFS Evolution for Multicore Platforms

Goddard Space Flight Center, Greenbelt, Maryland This effort ports the Core Flight Executive (cFE)/Core Flight System (CFS) flight software architecture to multicore processor platforms, and provides mission developers with a common, flightready, flexible software environment that supports single, multi-processor, and multicore systems. Currently the cFE/CFS only supports single-core processors.

Posted in: Briefs, TSP, Electronics & Computers, Architecture, Avionics, Communication protocols, Computer software and hardware

Read More >>

Hermetic Feedthroughs for Mission-Critical Electronics

Sealed cavities are important in applications such as power electronics for missiles aboard ships or on high-altitude flights; automotive charging stations; and high-voltage power generation. Douglas Electrical Components, Randolph, New Jersey One of the most common causes of electronics failure is moisture. Because water and electronics do not mix well, several strategies exist to protect mission-critical components from moisture and condensation. One of the most successful methods involves hermetically sealed electronics cavities enabled by moisture-blocking component assemblies such as hermetic feedthrough technology.

Posted in: Briefs, Electronics & Computers, Electronic equipment, Water, Corrosion

Read More >>

Selecting the Right Vent to Extend the Lifetime of Electronic Components in Vehicles

Electronic components are rapidly replacing mechanical parts in automobiles. Suppliers must protect these electronic components from harsh contaminants and temperature fluctuations, to ensure reliable performance. Selecting the right venting solution can help to extend the life of the electronic component.

Posted in: White Papers, Automotive, Electronic Components, Electronics & Computers

Read More >>

Ultra-High-Power W-Band/F-Band Schottky Diode-Based Frequency Multipliers

These multipliers can be used in millimeter-wave radars or radiometers in national security applications such as standoff personnel screening, mass transit security, and perimeter intrusion.All-solid-state, room-temperature, multipixel, sub milli meter-wave re ceiv ers are in demand for efficient spatial mapping of a planet’s atmosphere composition and wind velocities for future NASA missions to Venus, Jupiter, and its moons. Roomtemperature operation based on Schottky diode technology is a must in order to avoid cryogenic cooling and enable long-term missions. This technology is also being successfully applied for very-high-resolution imaging radars for standoff detection of concealed weapons. For submillimeter-wave radar imaging, the main issue is that, in order to reach video frame rates with high image pixel density, multi-pixel focal plane transceiver arrays are needed to illuminate targets with many radar beams simultaneously.

Posted in: Briefs, Electronics & Computers, Amplifiers, Imaging and visualization, Radar

Read More >>

FPGA Reconfiguration with Accelerated Bitstream Relocation

Goddard Space Flight Center, Greenbelt, Maryland Partial bitstream relocation (PBR) on field programmable gate arrays (FPGAs) is a technique to re-scale parallelism of accelerator architectures at run time and enhance fault tolerance. PBR techniques have focused on reading inactive bitstreams stored in memory, on-chip or off-chip, whose contents are generated for a specific partial reconfiguration region (PRR) and modified on demand for configuration into a PRR at a different location.

Posted in: Briefs, TSP, Electronics & Computers, Architecture, Computer software and hardware, Data exchange

Read More >>

Real-Time LiDAR Signal Processing FPGA Modules

Goddard Space Flight Center, Greenbelt, Maryland A scanning LiDAR, by its inherent nature, generates a great deal of raw digital data. To generate 3D imagery in real time, the data must be processed as quickly as possible. One method of discerning time-of-flight of a laser pulse for a LiDAR application is correlating a Gaussian pulse with a discretely sampled waveform from the LiDAR receiver.

Posted in: Briefs, TSP, Electronics & Computers, Imaging and visualization, Lidar

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.