Articles

Products of Tomorrow: September 2016

The technologies NASA develops don’t just blast off into space. They also improve our lives here on Earth. Life-saving search-and-rescue tools, implantable medical devices, advances in commercial aircraft safety, increased accuracy in weather forecasting, and the miniature cameras in our cellphones are just some of the examples of NASA-developed technology used in products today.

Posted in: Products, Aerospace, Manufacturing & Prototyping

Read More >>

Product of the Month: September 2016

The PADS PCB Product Creation Platform from Mentor Graphics, Wilsonville, OR, is a design creation platform that provides schematic capture, component management, simulation and analysis, PCB layout and routing, and manufacturing analysis and outputs. The platform also provides intelligent component selection and data management, definition of rules and constraints, circuit reuse, and variant creation and management during circuit creation. Capabilities include analog/mixed-signal simulation that analyzes, solves, and verifies signal integrity and DDR memory issues; rules-based electronic design rule-checking to identify EMI, SI, and PI problems; thermal analysis; constraint and variant management; ECAD/MCAD collaboration; and design for manufacturing (DFMA) analysis. For Free Info Visit http://info.hotims.com/61065-120

Posted in: Products, Aerospace, Manufacturing & Prototyping

Read More >>

Products of Tomorrow: August 2016

The technologies NASA develops don’t just blast off into space. They also improve our lives here on Earth. Life-saving search-and-rescue tools, implantable medical devices, advances in commercial aircraft safety, increased accuracy in weather forecasting, and the miniature cameras in our cellphones are just some of the examples of NASA-developed technology used in products today.

Posted in: Products, Aerospace, Manufacturing & Prototyping

Read More >>

Product of the Month: August 2016

Hexagon Manufacturing Intelligence, North Kingstown, RI, introduced the BLAZE 600M non-contact optical measurement solution. The flexible, manually operated system provides ultra-rapid 3D data acquisition and actionable data for measurement, inspection, product development, line tuning, and reverse engineering. The scanner performs feature and surface measurements of parts and assemblies in various sizes, combining high-resolution digital imaging with blue light LED illumination, and does not require surface treatment of metallic, plastic, and composite parts. The system is not sensitive to industrial and ambient light sources or indirect daylight. It is designed for operation in high-vibration industrial environments. The all-in-one system is available in two projection configurations for tasks such as routine dimensional control operations or measurement of workpieces with complex features or challenging material types. Operators can also directly switch between surface data acquisition modes. For Free Info Visit http://info.hotims.com/61064-120

Posted in: Products, Aerospace, Manufacturing & Prototyping

Read More >>

Measurement Terminal

The EL3751 EtherCAT terminal from Beckhoff Automation (Savage, MN) provides measurement as part of a standard I/O system. It acquires data at 10,000 samples per second and provides measurement accuracy of ±0.01% for most interfaces at 25 °C, and 24-bit resolution. Parameterization options are available for the analog input, which supports measurement functions U, I, R, DMS (strain gauge), and RTD. Optionally, measured data can be transmitted to higher-level automation devices with oversampling. The integrated distributed clocks ensure synchronized sampling across the EtherCAT system. Available measurements include voltage, current, resistance, electrical resistance, RTD, strain gauge/load cell, and potentiometer. For Free Info Visit http://info.hotims.com/61064-400

Posted in: Products, Manufacturing & Prototyping, Test & Measurement

Read More >>

Digital Measurement

Siemens (Munich, Germany) offers Flender Gearlog digital measurement technology for gears that captures values relating to rotational speed, torque, temperature, and vibration using special sensors that record important physical variables. The aim is to compare operational load spectra with the fatigue strength of individual gear unit components over time to match up the gear unit and the working machine for the long term. The system adds up these readings in parallel with machine capacity utilization. The measurement results are logged, saved, and digitally depicted in compressed form. Operators are able to visualize the results at any time or read them out in the form of a dataset. The measurements enable conclusions to be drawn about the applied load and loading capacity of gears, and can be used to identify possible sources of damage, capacity reserves, and overloading in the measured gear. For Free Info Visit http://info.hotims.com/61064-401

Posted in: Products, Manufacturing & Prototyping, Test & Measurement

Read More >>

Handheld Meter

The OMEGA® HHTP21 handheld particulate, humidity, and temperature meter from OMEGA Engineering (Stamford, CT) measures fine and coarse particle pollution from many different sources. Features include fine particulate matter (PM2.5) measurement, health index (0 to 9) detection and alarm, PM2.5 time weighted average reading, data hold and max/min with time stamp function, six-color LED indication air quality at good/moderate/poor, and preset warning point of buzzer alarm, LED, and alarm output. The meter monitors particulate pollution in burning plants, petrochemical facilities, thermal power plants, restaurants, hospitals, mining facilities, metal refineries, and commercial and public buildings. For Free Info Visit http://info.hotims.com/61064-403

Posted in: Products, Manufacturing & Prototyping, Test & Measurement

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.