Products

Phantom® V7.3

Vision Research, Wayne, NJ, has introduced an upgraded version of the Phantom® V7.3 digital high-speed camera that allows users to capture 500,000 pictures per second. The camera has two operating modes. In standard mode, users can capture images between 6,700 frames per second (fps) and 190,000 fps, and can adjust exposure programmable to 1/framerate. In turbo mode, the camera acquires images up to 500,000 fps at a resolution of 32×16 and with a fixed 1-microsecond exposure time. Users can switch between modes by using Phantom software that comes with the camera. Other features includue standard 8-bit image depth, with 14-bit image depth optional; 4800 ISO/ASA monochrome or 1200 ISO/ASA color sensitivity equivalency; global on-chip shuttering to 1 microsecond; auto exposure control; up to 16 GB DRAM, and 24 GB non-volatile flash memory; continuous video output; and Gigabit Ethernet or RS-232 control. For Free Info Visit Here

Posted in: Products

Read More >>

Product of the Month: High-Power Microscope

FEI (Hillsboro, OR) has released the PhenomTM microscope, bridging the performance gap between optical and scanning electron microscope (SEM) technologies. Capable of yielding magnification up to 20,000× — 20 times higher than most advanced optical scopes — and with an ultimate resolution of 30nm, the Phenom addresses a wide variety of industrial and academic applications including quality assurance, product development, research, and testing.

Posted in: Products, Products

Read More >>

Optical Time Domain Reflectometer

Luna Technologies (Roanoke, VA) has announced the Optical Backscatter Reflectometer (OBRTM) 4400, an optical time domain reflectometer (OTDR) that can diagnose, locate, and troubleshoot problems in fiber optic components and assemblies such as splices, breaks, connectors, bends, and hot-spots. The OBR 4400 features micrometer spatial resolution, range to 2 km, and sensitivity of -130 dB. Integrated distributed sensing capability enables users to view the effects from component-level heating in optical amplifiers, monitor temperature inside cabinets and enclosures, and identify the location of fiber assemblies by touching the fiber. The OBR 4400 is also suitable for use in component manufacturing, aerospace installation and maintenance testing, mobile platforms, and secure networks.

Posted in: Products, Products

Read More >>

Modular LED Test System

Edmund Optics (Barrington, NJ) has released the MLED modular LED test and measurement systems available in three configurations for making measurements on discrete LEDs, arrays, and assemblies. The MLED-2 version includes a 2-inch diameter integrating sphere with a ½-inch diameter input port for making measurements on discrete devices. The MLED-6 system includes the MLED-2 along with a 6-inch integrating sphere assembly, and is suitable for intensity measurements of LEDs and for flux measurements of LED assemblies up to 1.5-inch in diameter. The MLED-12 system consists of the MLED-2 base and a 12-inch integrating sphere with 4-inch diameter port, and is suitable for flux measurements of larger LED assemblies and arrays. The MLED base systems consist of a 2048-element CCD spectrometer, an internal calibration lamp with power supply, and a set of three calibrated neutral density filters. The CCD spectrometer offers a resolution of 1.5 nm with 0.5 nm accuracy over a range of 350 to 1000 nm. The detector can measure luminous flux to 200 lumens using the OD2 filter. Exposure time ranges from 5 ms to 3 sec and stray light is 0.05% at 600 nm.

Posted in: Products, Products

Read More >>

Continuous Wave Laser

OSRAM Opto Semiconductors (Regensburg, Germany) has introduced a continuous wave laser offering thermal resistance of 2.5 K/W, an output of up to 6W, and a footprint measuring 6.0mm × 4.5 mm. It emits light at a wavelength of 810 nm through a prism that directs the laser’s light upwards. These capabilities allow the CW laser to be placed in any location on a circuit board. Operating temperature ranges from -40° to 100°C and the thermal conductivity of its base allows the laser unit to be soldered directly onto a metal core board. The system is suitable for volume applications such as night vision systems, closed circuit television, traffic monitoring, and medical applications.

Posted in: Products, Products

Read More >>

Laser Diode

Photonic Products (Hertfordshire, UK) has launched the Opnext HL6750MG 685nm Al-GaInP laser diode with a multi-quantum well structure. It has an optical output power of 50 mW CW, a package size of 5.6 mm, and a built-in photodiode for monitoring laser output which enables control of the auto power circuit. Supplied in a 5.6mm package, the Opnext HL6750MG is a single longitudinal mode laser diode with an optical power of 50 mW CW at a visible wavelength of 685 nm. It features an operating current of 75 mA, an operating voltage of 2.3 V, and a threshold current of 30 mA. The monitoring output current is 0.15 mA, while the operating temperature range is -10°C to 70°C. The Opnext HL6750MG is suitable for use in medical and biomedical applications such as X-ray scanners, industrial and medical sensor light sources, and as a light source for optical equipment such as distance meters, barcode scanners, and high-resolution CTP.

Posted in: Products, Products

Read More >>

Laser Alignment Module

BFi OPTiLAS (Evry, France) has developed the 300-0100-00 series 645nm laser alignment module offering a range of interchangeable, pre-aligned, precision optics: 88 degrees cross, 58 degrees line, 58 degrees cross/spot. The focus is user adjustable, as is the laser intensity (from 0.1 mW to 4.5 mW), allowing brightness to be optimized for the target material. The laser diode module incorporates anti-surge, anti-static, and reverse polarity protected electronics, an anti-reflection coated scratch resistant glass window, and a 2.11 mm jack socket to ease installation and replacement. The 300-0100-00 series comes in a 14mm housing, and each module is supplied with an adjustable mounting bracket, wall plug power supply, and power adjustment tool. Optional accessories include a 4-outlet junction box, 2m and 5m power extension leads, and all interchangeable optics heads.

Posted in: Products, Products

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.