Products

Stepper Motor

Lin Engineering (Morgan Hill, CA) released the Xtreme Torque E5618 stepper motor that has been designed to reduce stalling, skipped steps, and provide efficient torque. The new design allows users to stay within the same frame size. The NEMA 23 stepper has a holding torque of 150 oz-in and is suited for applications with heavier loads or at increased risk of stalling or skipping steps. It also allows for an integral connector or flying lead wires.

Posted in: Articles, Products, Motors & Drives

Read More >>

Motor Driver ICs

Toshiba America Electronic Components (San Jose, CA) offers four motor driver ICs, ranging from precision stepper motor drivers to sensorless brushless DC motor drivers. The TB67S269FTG bipolar stepping motor driver has a maximum rating of 50V and 2.0A. Three brushless DC motor drivers — the TB67B001FTG, TB67B008FTG, and TB67B008FNG — feature maximum rating of 25V and 3.0A. The TB67S269FTG targets applications requiring high-speed, high-precision motor drives. The driver’s high-resolution, 1/32-step motor driving technology lowers noise and vibration, while heat generation is reduced via low ON resistance (0.8Ω or less, upper + lower) MOSFET H-bridges and featuring Toshiba’s Advanced Mixed Decay (ADMD) technology that optimizes the drive capability of complex motor currents.

Posted in: Articles, Products, Motors & Drives

Read More >>

Encoders

CUI (Tualatin, OR) offers the AMT31 modular encoder series that generates standard U/V/W commutation signals for vectoring current to brushless motors. Positional information is generated using a patented capacitive code generation system coupled with a proprietary ASIC. The encoder is designed for use in brushless dc motor applications subject to vibration and contaminants such as dust, dirt, and oil that typically stop optical encoders from working effectively. They deliver accuracy of ±12 arcmin (±0.2 mechanical degrees). Twenty programmable resolutions are available with a range of 48 to 4096 PPR.

Posted in: Articles, Products, Motors & Drives, Positioning Equipment

Read More >>

AC Drive

The VACON® 100 FLOW from VACON (Milwaukee, WI) is an AC drive designed to improve flow control for multi-pump applications in which several pumps are used in place of a single one. The drive offers control of flow and pressure for a maximum of eight pumps (or fans) without the need for an external controller — communication between drives is provided by integrated RS-485. It is equipped with built-in Ethernet as standard, eliminating additional options or gateways needed to communicate with process automation. The drive offers three multi-pump control solutions: single-drive multi-pump, multi-drive multi-master, and multi-drive multi-follower.

Posted in: Articles, Products, Motors & Drives

Read More >>

Table Motors

Siemens AG (Munich, Germany) offers the Simotics DP motors based on the 1LE1 motor platform. The ventilated roller table motors are designed for applications in the steel industry where they must meet requirements for vibration and shock according to Class 3M4. Versions of the motors are optimized for use with converters of the Sinamics S120 series and, as integrated drive systems, contribute to reliable and efficient operation. The motor design has been tested in accordance with to DIN EN60721-3-3. They are available in 4- and 6-pole designs with shaft heights from 112 to 280 mm, and in the torque range from 20 to 578 Nm. The series comprises not only mains powered motors, but also versions optimized for converter operation with special insulation systems. When used together with the Sinamics S120 drive system, these motors form an integrated drive system.

Posted in: Articles, Products, Motors & Drives

Read More >>

Motion Controller

FANUC America Corp. (Rochester Hills, MI) offers the Power Motion i-MODEL A motion controller for multi-axes general motion applications. The controller is an integrated solution supporting up to 32 axes of motion control, combined with high-speed programmable logic controllers supporting up to 2,048 input and 2,048 output points. The controller provides a variety of standard screens for setup, operation, and maintenance, and a high-level motion path programming system.

Posted in: Articles, Products

Read More >>

Linear Actuators

Parker’s Electromechanical Automation Division (Irwin, PA) released the High Moment Rodless (HMR) electromechanical linear actuator series that features five different frame sizes, two different drive train options, an IP54 protective cover option, and multiple motor mounting, carriage, and sensor options. The actuators integrate externally accessible lubrication fittings into the carriage that evenly disperse lubricant across the bearing trucks and ball nut. Two options for chassis profiles are available: basic or reinforced.

Posted in: Articles, Products

Read More >>