Mechanical & Fluid Systems

Passive Close-Off Feature for Sample Acquisition and Retention

This design has applications in the oil and gas field, and in coring to collect samples from human internal organs for medical applications. NASA’s Jet Propulsion Laboratory, Pasadena, California The current coring bit and percussive drilling style works very well for strong rocks; however, when coring into weak, crumbling rock, the core tends to break apart and simply fall out of the bit. These rocks, powder, and other debris can have useful information that is lost when they fall out of the bit after the core has been made, as there is no retention feature in place. A retention mechanism for coring into weak rocks was developed.

Posted in: Briefs, TSP

Read More >>

Piezoelectric-Actuated Cryogenic Thermodynamic Vent Valve

Piezoceramic transducer elements with ceramic dielectric coating were successfully used in the actuator system. Lyndon B. Johnson Space Center, Houston, Texas Cryogenic fluid control valves require actuation that controls the geometric position of the orifice in a thermally stable manner. Traditional actuator devices may have various materials used in their construction that have varying CTEs (coefficients of thermal expansion) and therefore may shift (expand or contract) relative to the reference mounting points on the valve body. This leads to a lack of valve orifice control and leakage in the valve. To provide a more thermally stable control valve for cryogenic fluids, Dynamic Structures and Materials LLC (DSM LLC) provided a piezoelectric ceramic-driven actuation system on a cryogenic thermodynamic vent system (TVS) valve.

Posted in: Briefs, TSP

Read More >>

Amine Swingbed Payload

This system minimizes water and air loss. Lyndon B. Johnson Space Center, Houston, Texas The amine swingbed was in development for incorporation into Orion’s environmental control and life support system to remove metabolic carbon dioxide and humidity from the crew atmosphere. The compact, low-power swingbed uses space vacuum to regenerate itself. Direction was given by NASA to develop it for a payload experiment on ISS using the most recent engineering development laboratory unit. To minimize overboard humidity and crew cabin ullage losses, a method for removing humidity upstream of the amine swingbed had to be developed, along with a means to minimize overboard ullage losses when the swingbed cycled.

Posted in: Briefs

Read More >>

Decelerator System Simulation (DSS)

Lyndon B. Johnson Space Center, Houston, Texas The Crew Exploration Vehicle Parachute Assembly System (CPAS) project conducts computer simulations to verify that requirements on flight performance, parachute loads, and terminal rate of descent are met. The objective of this work was to obtain a high-fidelity simulation of Orion crew capsule flight test vehicles during parachute flight.

Posted in: Briefs, TSP

Read More >>

Unique Method for Orifice Production

To produce accurate, repeatable orifices, all the variables that might influence the Cd Value (Coefficient of Discharge) must be controlled during production. This includes the orifice hole length, edges, surface finishes, roundness and the elimination of all tool marks, burrs, ragged edges and irregularities. If any one of these areas is not perfectly managed, the orifice flow rates will vary from piece to piece thereby making it impossible to predict flow with any accuracy.

Posted in: Mechanics, White Papers, White Papers

Read More >>

Miniature, Multi-Functional, Self-Braking Vehicle

This vehicle is actuated by piezoelectric stacks through the fuselage walls. NASA’s Jet Propulsion Laboratory, Pasadena, California A novel, miniature, low-mass vehicle has been created that is driven by piezoelectric stacks and a resonance structure. Preliminary tests on similar mechanisms that are used to transmit electrical power across the wall showed efficiencies of the order of 90%. The transmitted mechanical power, and signals through metallic walls using the direct and indirect piezoelectric effects in similar motors, is of the order of 50%. The transmitted power is generated inside the vehicle body, and the mechanism is applicable to any robotic system that may require an ambulation of locomotion mechanism such as a rover, a miniature vehicle, a crawler, or a flying device.

Posted in: Briefs, TSP

Read More >>

Pulse-Echo Probe Mounting Fixture for Blind Alignment on Pipes

This technology enables an effective, real-time, in-service health monitoring system for steam pipes. NASA’s Jet Propulsion Laboratory, Pasadena, California The probe and its mounting fixture are critical parts of the health monitoring of steam pipes. A high-temperature, piezoelectric transducer generates and receives ultrasonic waves, and the probe has to transmit the wave normal to the pipe surface. The mounting fixture is designed to allow for alignment of the probe even without a reference reflection, and thus enables blind alignment. In order to allow aligning of the probe normal to the surface of potential water condensation, and to secure intimate contact to the pipe surface, a novel mounting fixture was conceived and developed.

Posted in: Briefs, TSP

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.